// Copyright 2017 The Wuffs Authors. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // https://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. // TODO: describe how the xxx_fastxx version differs from the xxx_slow one, the // assumptions that xxx_fastxx makes, and how that makes it fast. pri func decoder.decode_huffman_fast64!(dst: base.io_writer, src: base.io_reader) base.status, choosy, { // When editing this function, consider making the equivalent change to the // decode_huffman_slow function. Keep the diff between the two // decode_huffman_*.wuffs files as small as possible, while retaining both // correctness and performance. var bits : base.u64 var n_bits : base.u32 var table_entry : base.u32 var table_entry_n_bits : base.u32[..= 15] var lmask : base.u64[..= 511] var dmask : base.u64[..= 511] var redir_top : base.u32[..= 0xFFFF] var redir_mask : base.u32[..= 0x7FFF] var length : base.u32[..= 258] var dist_minus_1 : base.u32[..= 0x7FFF] var hlen : base.u32[..= 0x7FFF] var hdist : base.u32 var hdist_adjustment : base.u32 if (this.n_bits >= 8) or ((this.bits >> (this.n_bits & 7)) <> 0) { return "#internal error: inconsistent n_bits" } bits = this.bits as base.u64 n_bits = this.n_bits lmask = ((1 as base.u64) << this.n_huffs_bits[0]) - 1 dmask = ((1 as base.u64) << this.n_huffs_bits[1]) - 1 if this.transformed_history_count < args.dst.history_position() { return base."#bad I/O position" } hdist_adjustment = ((this.transformed_history_count - args.dst.history_position()) & 0xFFFF_FFFF) as base.u32 // Check up front, on each iteration, that we have enough buffer space to // both read (8 bytes) and write (266 bytes) as much as we need to. Doing // this check once (per iteration), up front, removes the need to check // multiple times inside the loop body, so it's faster overall. // // For writing, a literal code obviously corresponds to writing 1 byte, and // 258 is the maximum length in a length-distance pair, as specified in the // RFC section 3.2.5. Compressed blocks (length and distance codes). // // We adjust 258 up to (258 + 8) = 266 since it can be faster to overshoot // a little and make multiple-of-8-byte copies even when the length in the // length-distance pair isn't an exact multiple-of-8. Strictly speaking, // 264 (an exact multiple-of-8) is the tight bound but (258 + 8) is easier // for the Wuffs proof system, as length's type is refined to [..= 258], // // For reading, strictly speaking, we only need 6 bytes (48 bits) of // available input, because the H-L Literal/Length code is up to 15 bits // plus up to 5 extra bits, the H-D Distance code is up to 15 bits plus up // to 13 extra bits and 15 + 5 + 15 + 13 == 48. However, it's faster to // read 64 bits than 48 bits or (48 - n_bits) bits. while.loop(args.dst.length() >= 266) and (args.src.length() >= 8) { // Ensure that we have at least 56 bits of input. // // This is "Variant 4" of // https://fgiesen.wordpress.com/2018/02/20/reading-bits-in-far-too-many-ways-part-2/ // // 56, the number of bits in 7 bytes, is a property of that "Variant 4" // bit-reading technique, and not related to the DEFLATE format per se. // // The "& 63" is a no-op, and not part of the original "Variant 4" // technique, but satisfies Wuffs' overflow/underflow checks. bits |= args.src.peek_u64le() ~mod<< (n_bits & 63) args.src.skip_u32_fast!(actual: (63 - (n_bits & 63)) >> 3, worst_case: 8) n_bits |= 56 // Decode an lcode symbol from H-L. table_entry = this.huffs[0][bits & lmask] table_entry_n_bits = table_entry & 0x0F bits >>= table_entry_n_bits n_bits ~mod-= table_entry_n_bits if (table_entry >> 31) <> 0 { // Literal. args.dst.write_u8_fast!(a: ((table_entry >> 8) & 0xFF) as base.u8) continue.loop } else if (table_entry >> 30) <> 0 { // No-op; code continues past the if-else chain. } else if (table_entry >> 29) <> 0 { // End of block. this.end_of_block = true break.loop } else if (table_entry >> 28) <> 0 { // Redirect. redir_top = (table_entry >> 8) & 0xFFFF redir_mask = ((1 as base.u32) << ((table_entry >> 4) & 0x0F)) - 1 table_entry = this.huffs[0][ (redir_top + (((bits & 0xFFFF_FFFF) as base.u32) & redir_mask)) & HUFFS_TABLE_MASK] table_entry_n_bits = table_entry & 0x0F bits >>= table_entry_n_bits n_bits ~mod-= table_entry_n_bits if (table_entry >> 31) <> 0 { // Literal. args.dst.write_u8_fast!(a: ((table_entry >> 8) & 0xFF) as base.u8) continue.loop } else if (table_entry >> 30) <> 0 { // No-op; code continues past the if-else chain. } else if (table_entry >> 29) <> 0 { // End of block. this.end_of_block = true break.loop } else if (table_entry >> 28) <> 0 { return "#internal error: inconsistent Huffman decoder state" } else if (table_entry >> 27) <> 0 { return "#bad Huffman code" } else { return "#internal error: inconsistent Huffman decoder state" } } else if (table_entry >> 27) <> 0 { return "#bad Huffman code" } else { return "#internal error: inconsistent Huffman decoder state" } // length = base_number_minus_3 + 3 + extra_bits. // // The -3 is from the bias in script/print-deflate-magic-numbers.go. // That bias makes the "& 0xFF" 1 and 15-ish lines below correct. length = ((table_entry >> 8) & 0xFF) + 3 table_entry_n_bits = (table_entry >> 4) & 0x0F if table_entry_n_bits > 0 { // The "+ 253" is the same as "- 3", after the "& 0xFF", but the // plus form won't require an underflow check. length = ((length + 253 + (bits.low_bits(n: table_entry_n_bits) as base.u32)) & 0xFF) + 3 bits >>= table_entry_n_bits n_bits ~mod-= table_entry_n_bits } // Decode a dcode symbol from H-D. table_entry = this.huffs[1][bits & dmask] table_entry_n_bits = table_entry & 15 bits >>= table_entry_n_bits n_bits ~mod-= table_entry_n_bits // Check for a redirect. if (table_entry >> 28) == 1 { redir_top = (table_entry >> 8) & 0xFFFF redir_mask = ((1 as base.u32) << ((table_entry >> 4) & 0x0F)) - 1 table_entry = this.huffs[1][ (redir_top + (((bits & 0xFFFF_FFFF) as base.u32) & redir_mask)) & HUFFS_TABLE_MASK] table_entry_n_bits = table_entry & 0x0F bits >>= table_entry_n_bits n_bits ~mod-= table_entry_n_bits } // For H-D, all symbols should be base_number + extra_bits. if (table_entry >> 24) <> 0x40 { if (table_entry >> 24) == 0x08 { return "#bad Huffman code" } return "#internal error: inconsistent Huffman decoder state" } // dist_minus_1 = base_number_minus_1 + extra_bits. // distance = dist_minus_1 + 1. // // The -1 is from the bias in script/print-deflate-magic-numbers.go. // That bias makes the "& 0x7FFF" 2 and 15-ish lines below correct and // undoing that bias makes proving (dist_minus_1 + 1) > 0 trivial. dist_minus_1 = (table_entry >> 8) & 0x7FFF table_entry_n_bits = (table_entry >> 4) & 0x0F dist_minus_1 = (dist_minus_1 + (bits.low_bits(n: table_entry_n_bits) as base.u32)) & 0x7FFF bits >>= table_entry_n_bits n_bits ~mod-= table_entry_n_bits // The "while true { etc; break }" is a redundant version of "etc", but // its presence minimizes the diff between decode_huffman_fastxx and // decode_huffman_slow. while true, pre args.dst.length() >= 266, { // We can therefore prove: assert (length as base.u64) <= args.dst.length() via "a <= b: a <= c; c <= b"(c: 266) assert ((length + 8) as base.u64) <= args.dst.length() via "a <= b: a <= c; c <= b"(c: 266) // Copy from this.history. if ((dist_minus_1 + 1) as base.u64) > args.dst.history_length() { // Set (hlen, hdist) to be the length-distance pair to copy // from this.history, and (length, distance) to be the // remaining length-distance pair to copy from args.dst. hlen = 0 hdist = (((dist_minus_1 + 1) as base.u64) - args.dst.history_length()) as base.u32 if length > hdist { assert hdist < length via "a < b: b > a"() assert hdist < 0x8000 via "a < b: a < c; c <= b"(c: length) length -= hdist hlen = hdist } else { hlen = length length = 0 } hdist ~mod+= hdist_adjustment if this.history_index < hdist { return "#bad distance" } // Copy from this.history[(this.history_index - hdist) ..]. // // This copying is simpler than the decode_huffman_slow version // because it cannot yield. We have already checked that // args.dst.length() is large enough. args.dst.limited_copy_u32_from_slice!( up_to: hlen, s: this.history[(this.history_index - hdist) & 0x7FFF ..]) if length == 0 { // No need to copy from args.dst. continue.loop } if (((dist_minus_1 + 1) as base.u64) > args.dst.history_length()) or ((length as base.u64) > args.dst.length()) or (((length + 8) as base.u64) > args.dst.length()) { return "#internal error: inconsistent distance" } } // Once again, redundant but explicit assertions. assert (dist_minus_1 + 1) >= 1 assert ((dist_minus_1 + 1) as base.u64) <= args.dst.history_length() assert (length as base.u64) <= args.dst.length() assert ((length + 8) as base.u64) <= args.dst.length() // Copy from args.dst. // // For short distances, less than 8 bytes, copying atomic 8-byte // chunks can result in incorrect output, so we fall back to a // slower 1-byte-at-a-time copy. Deflate's copy-from-history can // pick up freshly written bytes. A length = 5, distance = 2 copy // starting with "abc" should give "abcbcbcb" but the 8-byte chunk // technique would give "abcbc???", the exact output depending on // what was previously in the writer buffer. if (dist_minus_1 + 1) >= 8 { args.dst.limited_copy_u32_from_history_8_byte_chunks_fast!( up_to: length, distance: (dist_minus_1 + 1)) } else if (dist_minus_1 + 1) == 1 { // (distance == 1) is essentially RLE (Run Length Encoding). It // happens often enough that it's worth special-casing. args.dst.limited_copy_u32_from_history_8_byte_chunks_distance_1_fast!( up_to: length, distance: (dist_minus_1 + 1)) } else { args.dst.limited_copy_u32_from_history_fast!( up_to: length, distance: (dist_minus_1 + 1)) } break } endwhile } endwhile.loop // Ensure n_bits < 8 by rewindng args.src, if we loaded too many of its // bytes into the bits variable. // // Note that we can unconditionally call undo_read (without resulting in an // "invalid I/O operation" error code) only because this whole function can // never suspend, as all of its I/O operations were checked beforehand for // sufficient buffer space. Otherwise, resuming from the suspension could // mean that the (possibly different) args.src is no longer rewindable, // even if conceptually, this function was responsible for reading the // bytes we want to rewind. if n_bits > 63 { return "#internal error: inconsistent n_bits" } while n_bits >= 8, post n_bits < 8, { n_bits -= 8 if args.src.can_undo_byte() { args.src.undo_byte!() } else { return "#internal error: inconsistent I/O" } } endwhile this.bits = (bits & (((1 as base.u64) << n_bits) - 1)) as base.u32 this.n_bits = n_bits if (this.n_bits >= 8) or ((this.bits >> this.n_bits) <> 0) { return "#internal error: inconsistent n_bits" } }