Files
wuffs/std/brotli
Claude 0b9cfddf3c std/brotli: let a shorter encoder workbuf work for short inputs
Move the ring buffer to the end of the workbuf layout (at qualities 2 to
9). A workbuf shorter than workbuf_len now works if it holds the input
so far (plus 16 bytes of slack) in the ring buffer region and the input
stays short enough for the ring buffer never to wrap. This matters most
for large-window brotli, where workbuf_len at lgwin 30 is more than
2 GiB, mostly for a ring buffer that short inputs never touch.

The parity harness now also checks its large-window configurations with
the shortest such workbuf (and that one byte less fails).
2026-10-27 02:36:23 +00:00
..

Brotli

Brotli is a general purpose compression format, combining LZ77 style length-distance back-references, Huffman coding, second order context modeling and a built-in static dictionary. It is specified by RFC 7932. The reference implementation is at github.com/google/brotli.

This package (std/brotli) is a decoder. It aims for exact parity with the reference implementation's decoder (libbrotlidec), version v1.2.1, and in particular its c/dec/decode.c file: the same output for valid input and the same verdict (and the same error code, mapped as below) for invalid input. The Wuffs code mirrors the C code's logic and validation checks, function by function, and comments like "Mirrors ReadHuffmanCode in decode.c" name the corresponding C function. The C code's explicit state machine (its BROTLI_STATE_ETC enums) is replaced by Wuffs coroutines.

Format Overview

A brotli stream starts with a 1, 4 or 7 bit WBITS header, giving the window size (the maximum back-reference distance, plus 16). It is followed by a sequence of metablocks. Each metablock header gives its uncompressed length (MLEN) and whether it is the last metablock. A metablock is one of:

  • a metadata block, whose payload is skipped (it does not produce output),
  • an uncompressed block, whose payload is byte-aligned and copied verbatim, or
  • a compressed block.

A compressed metablock header defines, for each of three block categories (literals, insert-and-copy commands and distances), the number of block types and the prefix codes for block type switches and block lengths. It then gives the distance parameters (NPOSTFIX and NDIRECT), the literal context modes, the literal and distance context maps (run-length and move-to-front encoded) and finally the groups of prefix (Huffman) codes. Each prefix code is either a "simple" code (up to 4 symbols) or a "complex" code (code lengths that are themselves prefix coded).

The metablock body is a sequence of commands. Each command inserts zero or more literal bytes (decoded with a prefix code chosen by the context map, from the previous two bytes and the current literal block type) and then copies bytes, either from earlier in the output (an LZ77 back-reference, possibly re-using one of the last four distances) or, for distances beyond the maximum possible back-reference, a transformed word from the static dictionary.

The final metablock is followed by zero padding up to a byte boundary. The decoder does not read any further than that.

Workbuf Layout

Without the large-window quirk and without attached dictionaries (see the "Large Window" and "Dictionaries" sections below), workbuf_len is `(1 << 24)

  • 542bytes, both minimum and maximum: the largest (non-large-window) brotli window size plus some slack. The slack mirrors the C code'skRingBufferWriteAheadSlack, which its fast paths use to write (and discard) a few bytes past the ring buffer's end. This implementation does not yet have such fast paths, but it still reserves the slack, so that adding them later will not change the workbuf_lenAPI. A workbuf shorter than the stream's window size plus 542 bytes is rejected withbase."#bad workbuf length"`.

The first (1 << WBITS) bytes of the workbuf are the history ring buffer. Decoded bytes are written to the ring buffer and then copied to the dst io_writer. Before the ring buffer wraps around, all of its bytes must have been copied to dst, so transform_io can suspend with $short write.

The C code's ring buffer (s->ringbuffer_size) can start smaller than the window size (its "canny ring buffer allocation") and grows over successive metablocks. The Wuffs ring buffer is always (1 << WBITS) bytes long, but the decoder still tracks the C code's (virtual) ring buffer size, as it decides when the C code calls WriteRingBuffer. That in turn decides whether some invalid input (an overrun metablock) is reported as BLOCK_LENGTH_1 or BLOCK_LENGTH_2, and when the C code's max_distance becomes fixed.

Everything else (the Huffman tables, context maps, etc.) lives in the decoder struct, not the workbuf. The Huffman tables use the same 8-bit root table and second level table layout as the C code, sized per tree as the C code allocates them.

Status Mapping

Every BROTLI_DECODER_ERROR_FORMAT_* error code (and running out of input) has a corresponding Wuffs status:

libbrotlidec error code Wuffs status
BROTLI_DECODER_ERROR_FORMAT_EXUBERANT_NIBBLE "#bad exuberant nibble"
BROTLI_DECODER_ERROR_FORMAT_RESERVED "#bad reserved bit"
BROTLI_DECODER_ERROR_FORMAT_EXUBERANT_META_NIBBLE "#bad exuberant metadata nibble"
BROTLI_DECODER_ERROR_FORMAT_SIMPLE_HUFFMAN_ALPHABET "#bad simple Huffman alphabet"
BROTLI_DECODER_ERROR_FORMAT_SIMPLE_HUFFMAN_SAME "#bad simple Huffman symbol"
BROTLI_DECODER_ERROR_FORMAT_CL_SPACE "#bad code length code lengths"
BROTLI_DECODER_ERROR_FORMAT_HUFFMAN_SPACE "#bad Huffman space"
BROTLI_DECODER_ERROR_FORMAT_CONTEXT_MAP_REPEAT "#bad context map repeat"
BROTLI_DECODER_ERROR_FORMAT_BLOCK_LENGTH_1 "#bad block length"
BROTLI_DECODER_ERROR_FORMAT_BLOCK_LENGTH_2 "#bad metablock length"
BROTLI_DECODER_ERROR_FORMAT_TRANSFORM "#bad transform"
BROTLI_DECODER_ERROR_FORMAT_DICTIONARY "#bad dictionary"
BROTLI_DECODER_ERROR_FORMAT_WINDOW_BITS "#bad window bits" or "#unsupported large window"
BROTLI_DECODER_ERROR_FORMAT_PADDING_1 "#bad padding"
BROTLI_DECODER_ERROR_FORMAT_PADDING_2 "#bad final padding"
BROTLI_DECODER_ERROR_FORMAT_DISTANCE "#bad distance"
BROTLI_DECODER_ERROR_FORMAT_BLOCK_SWITCH "#bad block switch"
BROTLI_DECODER_ERROR_COMPOUND_DICTIONARY "#bad compound dictionary"
BROTLI_DECODER_NEEDS_MORE_INPUT (with closed src) "#truncated input"

Notes:

  • "#unsupported large window" is for the large-window escape WBITS value (0010001) when the QUIRK_LARGE_WINDOW quirk is not set. libbrotlidec (with BROTLI_DECODER_PARAM_LARGE_WINDOW not set, the default) rejects it with BROTLI_DECODER_ERROR_FORMAT_WINDOW_BITS. For standard (non-large-window) brotli, no other WBITS value is invalid. With the quirk set, "#bad window bits" is for a large-window header with a non-zero reserved bit or with window bits outside of [10 ..= 30].
  • Like the C code, which error an overrun metablock produces ("#bad block length" or "#bad metablock length") can depend on how the input is split across transform_io calls. When the C code runs out of input, it first tries to flush its output (WriteRingBuffer) and that checks for an overrun metablock. A Wuffs $short read suspension corresponds to the C code's running out of input.
  • "#bad block switch" needs more than (1 << 24) commands in one metablock. It is implemented but not tested.
  • The remaining libbrotlidec error codes do not apply: DICTIONARY_NOT_SET (it needs a word list without data, which libbrotlidec only has when built with BROTLI_EXTERNAL_DICTIONARY_DATA and not given that data), INVALID_ARGUMENTS, the ALLOC_* codes (this decoder does not allocate) and UNREACHABLE.

The "#internal error: etc" statuses should never happen. They are consistency checks, generally where the C code relies on (unchecked) invariants for memory safety but Wuffs requires explicit bounds checks.

Differences from the C Code

  • The bit reader reads input bytes only when it needs them (like the C code's "safe" BrotliSafeReadBits and SafeReadSymbol functions), so that transform_io can suspend at any point. There is no "fast path" (like the C code's ProcessCommands, as opposed to SafeProcessCommands). Both paths produce the same output and errors.
  • LZ77 copies and dictionary words are written to the ring buffer one byte at a time, with ring buffer events (the C code's WriteRingBuffer and WrapRingBuffer calls) at the same positions as the C code.
  • On error, the Wuffs decoder may have already written more output to dst than libbrotlidec would have (libbrotlidec does not flush on error), but what both have written agrees.

TODO

  • Metadata callbacks (metadata blocks are currently skipped). See the "Metadata Blocks" section below.
  • Fast paths.
  • Encoder quality levels 10 and 11, encoder dictionaries and large-window encoding at qualities 3 and above (see the "Encoder" section below).

Encoder

This package also has an encoder, which implements the base.io_transformer interface. It aims for byte-exact parity with the reference implementation's encoder (libbrotlienc), version v1.2.1: for the same parameters and the same sequence of operations, it produces exactly the same bytes. Like the decoder, the Wuffs code mirrors the C code function by function, with comments like "Mirrors BrotliCompressFragmentFast in compress_fragment.c". Its floating point arithmetic (the C code's doubles) uses std/softfloat, so that the results are bit-exact regardless of the compiler and CPU.

Qualities 0 to 9 are implemented: qualities 0 and 1 (the C code's FAST_ONE_PASS_COMPRESSION_QUALITY and FAST_TWO_PASS_COMPRESSION_QUALITY, implemented by compress_fragment.c and compress_fragment_two_pass.c) and qualities 2 to 9 (the C code's EncodeData path: a ring buffer, hashers, BrotliCreateBackwardReferences with static dictionary matching, and WriteMetaBlockInternal, which picks BrotliStoreMetaBlockFast at quality 2, BrotliStoreMetaBlockTrivial at quality 3 and, at qualities 4 to 9, the literal context modeling heuristics, BrotliBuildMetaBlockGreedy, BrotliOptimizeHistograms and BrotliStoreMetaBlock). For qualities 10 and 11 (including the default quality, 11), and for large-window brotli at qualities 3 and above, transform_io returns "#unsupported encoder quality" (and workbuf_len is 0). Large-window brotli works at quality 2 (and is ignored at qualities 0 and 1, like the C code).

The source files are:

  • encode_brotli.wuffs: the encoder struct, its public methods and the encode.c streaming logic (BrotliEncoderCompressStream, BrotliEncoderCompressStreamFast, ProcessMetadata, EnsureInitialized, InjectBytePaddingBlock, etc).
  • encode_quirks.wuffs: the encoder's quirk keys.
  • encode_bit_writer.wuffs: write_bits.h, fast_log.h, find_match_length.h and small brotli_bit_stream.c helpers.
  • encode_entropy.wuffs: entropy_encode.c (Huffman tree construction) and the brotli_bit_stream.c functions that store Huffman codes.
  • encode_fragment_fast.wuffs: compress_fragment.c (quality 0).
  • encode_fragment_two_pass.wuffs: compress_fragment_two_pass.c (quality 1).
  • encode_bit_cost.wuffs: bit_cost.c, bit_cost_inc.h and fast_log.h (BrotliBitsEntropy, BrotliPopulationCost{Literal,Command,Distance}), as methods of the bit_cost struct.
  • encode_histogram.wuffs: histogram.h, histogram_inc.h and histogram.c (histogram helpers and BrotliBuildHistogramsWithContext), also as bit_cost methods.
  • encode_data.wuffs: the rest of encode.c that qualities 2 to 9 use (EncodeData, WriteMetaBlockInternal, ShouldCompress, DecideOverLiteralContextModeling, ChooseContextMap, UpdateSizeHint, ExtendLastCommand, etc), ringbuffer.h, the quality.h helpers and the workbuf layout.
  • encode_hasher.wuffs: hash.h and the hash_*_inc.h hashers (H2, H3, H4, H54, H5, H6, H58, H68, H40, H41 and H42) and SearchInStaticDictionary (with static_dict.c's matching), as one set of functions selected by the hasher type at run time.
  • encode_backward_references.wuffs: backward_references.c and backward_references_inc.h (BrotliCreateBackwardReferences), command.h and ComputeDistanceCode.
  • encode_bit_stream.wuffs: brotli_bit_stream.c (StoreMetaBlockHeader, BrotliStoreUncompressedMetaBlock, BrotliStoreMetaBlockTrivial, BrotliStoreMetaBlockFast, BrotliStoreMetaBlock, block split codes, EncodeContextMap with move-to-front and run-length coding, BuildAndStoreEntropyCodes, etc).
  • encode_metablock_greedy.wuffs: BrotliBuildMetaBlockGreedy (and its greedy block splitters, metablock_inc.h) and BrotliOptimizeHistograms for its output.
  • encode_util.wuffs: little-endian workbuf accessors.
  • encode_block_splitter.wuffs: block_splitter.c and block_splitter_inc.h (BrotliSplitBlock), as methods of the metablock_builder struct.
  • encode_cluster.wuffs: cluster.c and cluster_inc.h (BrotliClusterHistograms and its helpers), also as metablock_builder methods.
  • encode_metablock.wuffs: the metablock_builder struct and metablock.c (BrotliInitDistanceParams, BrotliBuildMetaBlock, BrotliOptimizeHistograms). See "Encoder Metablock Builder" below. Only quality 10 and above use BrotliBuildMetaBlock, so the encoder does not call it yet, but it uses some of the smaller functions (BrotliInitDistanceParams, PrefixEncodeCopyDistance, CommandRestoreDistanceCode and BrotliOptimizeHuffmanCountsForRle).
  • encode_tester.wuffs: TEST ONLY. The metablock_tester struct exposes the internal functions above to C test programs. It is not part of the encoder API.
  • common_encoder_tables.wuffs: tables generated by go run script/print-brotli-tables.go -encoder from the C code (including the static dictionary hash tables of dictionary_hash.c and the static_dict_lut.h buckets and words).

Encoder API

In addition to the base.io_transformer methods, the encoder has:

  • request_flush!() status: the next transform_io call acts like the C code's BROTLI_OPERATION_FLUSH (instead of PROCESS or FINISH) until the flush is complete. It returns "#bad call sequence" while a metadata request is pending.
  • request_emit_metadata!(length: u64) status: the next transform_io call acts like BROTLI_OPERATION_EMIT_METADATA, with the next length bytes of src as the metadata block's contents. length can be at most 1 << 24 (otherwise "#bad argument"). It returns "#bad call sequence" while another request is pending.
  • max_compressed_size(input_size: u64) u64: mirrors BrotliEncoderMaxCompressedSize (0 means overflow).

dst_history_retain_length is 0: the encoder never re-reads dst.

Encoder Quirks

Each quirk mirrors one BrotliEncoderParameter, with the value semantics of BrotliEncoderSetParameter. Values are stored as is (and must fit in a u32, otherwise set_quirk returns "#bad argument"). Like the C code, they are sanitized (SanitizeParams, ComputeLgBlock, ChooseDistanceParams) at the first transform_io call, after which set_quirk returns "#bad call sequence".

Quirk C parameter
QUIRK_ENCODER_QUALITY BROTLI_PARAM_QUALITY (default 11)
QUIRK_LGWIN BROTLI_PARAM_LGWIN (default 22)
QUIRK_LGBLOCK BROTLI_PARAM_LGBLOCK
QUIRK_MODE BROTLI_PARAM_MODE
QUIRK_DISABLE_LITERAL_CONTEXT_MODELING BROTLI_PARAM_DISABLE_LITERAL_CONTEXT_MODELING (0 or 1)
QUIRK_SIZE_HINT BROTLI_PARAM_SIZE_HINT
QUIRK_LARGE_WINDOW (shared with the decoder) BROTLI_PARAM_LARGE_WINDOW
QUIRK_NPOSTFIX BROTLI_PARAM_NPOSTFIX
QUIRK_NDIRECT BROTLI_PARAM_NDIRECT
QUIRK_STREAM_OFFSET BROTLI_PARAM_STREAM_OFFSET (at most 1 << 30)

The quality quirk is not named QUIRK_QUALITY because that name would clash with base.QUIRK_QUALITY. At qualities 0 and 1, only the quality, lgwin and stream offset affect the output (lgblock, mode, size hint, large window, npostfix, ndirect and literal context modeling are stored, sanitized and then ignored, as in the C code). At qualities 2 to 9, they have the same effect as in the C code: lgblock (at qualities 4 and above; the C code's ComputeLgBlock fixes it to 14 below that), npostfix, ndirect and the mode (only BROTLI_MODE_FONT matters, through ChooseDistanceParams, at qualities 4 and above), disabling literal context modeling (at qualities 5 and above) and the size hint (the hasher choice at qualities 4 and above and the complex static context map at qualities 5 and above). An unset (zero) size hint is replaced by the C code's UpdateSizeHint estimate.

Encoder Workbuf Layout

At qualities 0 and 1, the workbuf is the C code's metablock storage (its GetBrotliStorage buffer): workbuf_len is (2 << lgwin) + 503 + 16 bytes (the storage for a 1 << lgwin byte block plus 16 bytes of slack for 8-byte bit writes), where lgwin is the sanitized value. A shorter workbuf still works if every input block is shorter: a block of n bytes needs (2 * n) + 519 bytes, otherwise transform_io returns "#bad workbuf length".

At qualities 2 to 9, the workbuf holds everything whose size depends on the input or on the parameters, in this order (see compute_layout_offset in encode_data.wuffs). Here rb_bits is 1 + max(lgwin, lgblock) (the C code's ComputeRbBits), max_len is 1 << min(rb_bits, 24) (the C code's MaxMetablockSize) and cmds_cap is the commands capacity (see below):

  1. The metablock storage: (2 * max_len) + 503 + 16 bytes, like at qualities 0 and 1 but for the largest metablock.
  2. The ring buffer (the C code's RingBuffer.buffer_): 2 + (1 << rb_bits) + (1 << lgblock) + 7 bytes. The first 2 bytes are the copy of the last two bytes that precede data_, the tail (1 << lgblock bytes) mirrors the start of the buffer and the 7 trailing bytes are the C code's slack for 8-byte loads.
  3. The hasher's memory (the C code's common->extra[0 .. 3]): the sum of FN(HashMemAllocInBytes) for the hasher that ChooseHasher picks. When the size hint quirk is unset (zero), that choice depends on the input's length (through UpdateSizeHint), so this is the larger of the two possible choices (for a size hint below or at least 1 MiB).
  4. The commands: 16 * cmds_cap bytes, in the C struct order: insert_len_ (u32le), copy_len_ (u32le, the copy length in the low 25 bits and copy_code - copy_len in the high 7 bits), dist_extra_ (u32le), cmd_prefix_ (u16le) and dist_prefix_ (u16le). cmds_cap is min(prior + ((1 << lgblock) / 2) + 1, (max_len / 2) + 1), where prior is (max_len / 8) - 1 (and at most MAX_NUM_DELAYED_SYMBOLS - 1, which is 0x2FFE, below quality 4): EncodeData keeps (merges with the next input block) fewer than that many commands and, like the C code's num_commands_ + bytes / 2 + 1 allocation, each input block of n bytes adds at most (n / 2) + 1 commands.
  5. At qualities 4 and above, BrotliBuildMetaBlockGreedy's MetaBlockSplit and BrotliStoreMetaBlock's scratch space:
    • the block types (u8) and then the block lengths (u32le) of the literal, command and distance block splits, with room for (max_len / 512) + 1, (cmds_cap / 1024) + 1 and (cmds_cap / 512) + 1 blocks (the C code's max_num_blocks, given that a metablock has at most max_len literals and cmds_cap commands),
    • the histograms (u32le counts, without the C code's total_count_ and bit_cost_ fields, which are not needed here): up to 260 literal histograms ((256 / 13) + 1 block types of 13 contexts), 257 command histograms and 257 distance histograms of 256, 704 and 544 counts,
    • the block splitters' combined_histo (2 * 13 * 256 u32le counts),
    • the literal context map (256 * 64 bytes),
    • EncodeContextMap's rle_symbols (256 * 64 u32le values) and
    • the block encoders' depths (u8) and then bits (u16le) for up to 256 histograms per category.

Unlike the C code, which allocates its storage and command buffers as it goes (for the actual metablock and block sizes), workbuf_len is the worst case for the sanitized parameters, so that one workbuf works for any input. At qualities 2 to 9, transform_io returns "#bad workbuf length" if the workbuf is shorter than that. Some examples (in MiB, with the default lgblock and an unset size hint):

quality lgwin 10 lgwin 16 lgwin 18 lgwin 22 lgwin 24
0, 1 0.0 0.1 0.5 8.0 32.0
2, 3 0.5 1.0 2.1 24.6 64.6
4 7.9 7.9 9.8 47.3 103.4
5 4.4 4.4 7.0 45.9 102.0
7 4.4 4.4 13.8 51.4 107.5
9 5.1 5.1 39.5 77.1 133.2

Fixed-size state (the hash table and command and literal buffers of qualities 0 and 1, the Huffman scratch space, the greedy block splitters' state, the block encoders' block type and length codes, etc) lives in the encoder struct (which is therefore about 2.5 MiB). It does not need zero-initializing: WUFFS_INITIALIZE__LEAVE_INTERNAL_BUFFERS_UNINITIALIZED is fine. At qualities 0 and 1, the input block is not copied: the encoder compresses directly from src. At qualities 2 to 9, like the C code, the input is copied into the ring buffer.

Encoder Operation Mapping

Each transform_io call (initial or resumed) corresponds to one or more BrotliEncoderCompressStream calls, with src's readable bytes as the C code's available_in and dst's writable bytes as available_out. The operation is:

  • EMIT_METADATA if request_emit_metadata is pending (until the metadata block is complete),
  • otherwise FLUSH if request_flush is pending (until the flush is complete),
  • otherwise FINISH if src is closed,
  • otherwise PROCESS.

transform_io suspends with "$short write" when there is pending output (the C code's BrotliEncoderHasMoreOutput) but dst is full, suspends with "$short read" when all of src is consumed (and, for a flush, the flush is complete) and returns ok once the stream is finished (the C code's BrotliEncoderIsFinished). So these two loops produce the same bytes:

  • C: for each chunk, call BrotliEncoderCompressStream(op) until all of the chunk is consumed and there is no more output (or, for FINISH, until finished).
  • Wuffs: for each chunk, call request_flush (for FLUSH) or request_emit_metadata(len) (for EMIT_METADATA), make src hold exactly that chunk (closed for FINISH) and call transform_io until it returns "$short read" (or ok for FINISH), giving it more dst room after each "$short write".

At qualities 0 and 1 the C code compresses each call's available input immediately (in blocks of at most 1 << lgwin bytes), so the output depends on how the input is split into chunks. The test programs' encode drivers (wuffs_brotli_encode_plan in test/c/std/brotli.c and mimic_brotli_encode in test/c/mimiclib/brotli.c) run the same "plan" of (operation, length) steps with each library.

At qualities 2 to 9 the C code copies the input into its ring buffer and only compresses it (EncodeData) when an input block (1 << lgblock bytes) is full, or on a flush or finish, so the output depends on the chunking only through the flushes (and the UpdateSizeHint estimate, which depends on how much input is available when the first block is compressed). The Wuffs encoder makes the same EncodeData calls, at the same points. One transform_io call can correspond to several C calls: with a stream offset (the C code's "flint"), a C call can return early, with input left, after emitting the flint, and its callers then call it again.

Encoder Testing

wuffs test -mimic std/brotli checks byte-exact parity with libbrotlienc over a grid of qualities (0 to 9), lgwins, modes, input chunkings, flushes, metadata blocks, size hints and other parameters (lgblock, npostfix, ndirect, disabling literal context modeling, stream offset, large window at quality 2), as well as round trips through the decoder. script/manual-test-brotli-encoder-parity.c runs a larger grid over every file in test/data/brotli, some larger files in test/data (up to about 400 KiB) and some synthetic inputs (up to 1 MiB). Its -q=LO-HI and -shard=K/N options select the qualities and split the inputs over several processes. With -q=0-9 (the default) it runs 718,555 configurations (about 86 thousand of them at qualities 0 and 1), all byte-exact against libbrotlienc v1.2.1 on x86-64.

Encoder Differences from the C Code

  • At qualities 0 and 1, the input block is not copied (see the workbuf layout above). Output is always staged in the workbuf (or a small internal buffer) and then copied to dst. The C code sometimes writes directly to next_out. The bytes are the same.
  • The C code instantiates each hasher (and the block splitters) from templates. Here, each template is one set of functions, parameterized at run time (e.g. by the hasher type). The H58 and H68 hashers' SIMD tag matching (GetMatchingTagMask in matching_tag_mask.h) is computed one tag at a time, which finds the same candidates in the same order. Like the x86-64 GCC reference build (where BROTLI_MAX_SIMD_QUALITY is 6, as in any build with a 64-bit __builtin_ctzll), qualities 5 and 6 with lgwin above 16 use H58 or H68 instead of H5 or H6. libbrotlienc builds where BROTLI_MAX_SIMD_QUALITY is undefined (no 64-bit count-trailing-zeros builtin) or 7 (MSVC on x86-64) choose differently and so produce different (but valid) output at those qualities.
  • BrotliBuildMetaBlockGreedy's two kinds of block splitter (one for a single histogram per block type, metablock_inc.h, and one for several literal contexts, ContextBlockSplitter in metablock.c) are one implementation here, as they make the same decisions with one context.
  • Wuffs' C code generator does not support slice base.u16 or slice base.u32 arguments (and mishandles copy_from_slice on base.u16 arrays), so some functions (e.g. create_huffman_tree, convert_bit_depths_to_symbols) take a selector naming one of the encoder's arrays instead of a slice.
  • Like the C code, there is no fallback to an uncompressed stream (that is only in the C code's one-shot BrotliEncoderCompress).

Encoder Metablock Builder

The metablock_builder struct (a pri struct, embeddable in the encoder with one field, e.g. mb : metablock_builder in the private data section) implements the quality 10 and 11 metablock construction (BrotliBuildMetaBlock) and BrotliOptimizeHistograms. The encoder has one (its mb field) but only calls its smaller helpers so far (see the source file list above). Its fixed-size state (about 0.8 MiB: FindBlocks' cost arrays and a 64Ki-entry FastLog2 cache in its bit_cost) lives in the struct; everything that the C code allocates on the heap lives in a caller-supplied workbuf.

Data formats (all little-endian, matching the C structs' memory layout on a 64-bit little-endian machine, so that results can be compared with memcmp):

  • A command is 16 bytes: insert_len_ (u32), copy_len_ (u32), dist_extra_ (u32), cmd_prefix_ (u16), dist_prefix_ (u16), as built by command.h's InitCommand / InitInsertCommand.
  • A histogram is (4 * data_size) + 16 bytes: data_size u32 counts, the u64 total_count_ and the binary64 bits of bit_cost_. data_size is 256 (literals, 1040 bytes), 704 (commands, 2832 bytes) or 544 (distances, 2192 bytes).
  • A BlockSplit's types are u8s and its lengths u32s. Context maps are u32s.
  • Doubles are binary64 bit patterns (u64), computed with std/softfloat in the C code's operation order.

Usage, mirroring the C code's WriteMetaBlockInternal for quality >= 10:

// Once per metablock. The params are the C code's block_params, a copy of
// the encoder's params: init_distance_params must be called each time,
// because build_meta_block overwrites the dist_etc fields with the chosen
// distance params.
this.mb.set_params!(quality: q, large_window: lw,
        disable_literal_context_modeling: dlcm)
this.mb.init_distance_params!(npostfix: np, ndirect: nd, large_window: lw)
status = this.mb.build_meta_block!(wb: workbuf, ringbuffer: rb, pos: pos,
        mask: mask, prev_byte: pb, prev_byte2: pb2, cmds: cmds,
        num_commands: n, literal_context_mode: mode)
// Optional (quality >= 4): ndc is min(this.mb.dist_alphabet_size_limit, 544).
this.mb.optimize_histograms!(wb: workbuf, num_distance_codes: ndc)

The exact signatures are:

  • set_params!(quality: u32, large_window: bool, disable_literal_context_modeling: bool).
  • init_distance_params!(npostfix: u32, ndirect: u32, large_window: bool) (BrotliInitDistanceParams; sets dist_postfix_bits, dist_num_direct_codes, dist_alphabet_size_max, dist_alphabet_size_limit and dist_max_distance).
  • build_meta_block!(wb: slice u8, ringbuffer: roslice u8, pos: u64, mask: u64, prev_byte: u8, prev_byte2: u8, cmds: slice u8, num_commands: u64, literal_context_mode: u32) status. ringbuffer must be at least mask + 1 bytes. literal_context_mode is a ContextType (0 = LSB6, 1 = MSB6, 2 = UTF8, 3 = SIGNED). Like the C code, it rewrites the commands' dist_prefix_ and dist_extra_ fields for the chosen distance params and leaves those params in the dist_etc fields. Like the encoder's commands, every command's distance code must be at most the given params' max_distance (with larger, invalid distance codes, the C code's ComputeDistanceCost writes past the end of its distance histogram, which the Wuffs code cannot mirror: it ignores out-of-range histogram symbols instead). It returns "#bad workbuf length" if wb is too short (the results are then invalid but cmds may already be rewritten, so retrying needs the original commands).
  • optimize_histograms!(wb: slice u8, num_distance_codes: u32) works on the MetaBlockSplit described by the fields below, whether build_meta_block or the caller (e.g. a greedy builder) filled them in.
  • workbuf_len_worst_case(num_literals: u64, num_commands: u64) u64 is an upper bound on the workbuf length that build_meta_block needs, where num_literals is the sum of the commands' insert lengths. It assumes the worst case for every run-time-sized allocation (one FindBlocks block per symbol, 256 block types with 64 literal contexts each, full histogram pair queues), so it is far larger than what real inputs need: about 76 MiB for a 1 KiB metablock, 2.6 GiB for 1 MiB of literals and 128 Ki commands, and 41 GiB for 16 MiB of literals and 4 Mi commands. These are the C code's own worst cases (ClusterBlocks and BrotliClusterHistograms size their histogram pair queues by the number of blocks and clusters), not artifacts of the port. wb_high records what a call actually used: over the parity harness's inputs, at most about 42 MB (for 1.3 MiB of literals split into 256 literal block types).

The MetaBlockSplit result is described by these fields, indexed by category (0 = literal, 1 = command, 2 = distance), with offsets into wb:

Field C code
split_num_types[c] {literal,command,distance}_split.num_types
split_num_blocks[c] ..._split.num_blocks
split_types_off[c] ..._split.types (u8 array)
split_lengths_off[c] ..._split.lengths (u32 array)
context_map_off[c] {literal,distance}_context_map (u32 array; none for commands)
context_map_size[c] {literal,distance}_context_map_size
histograms_off[c] {literal,command,distance}_histograms
histograms_size[c] ..._histograms_size

Workbuf layout during build_meta_block (a bump allocator, wb_top, carves regions out of wb in this order; "scratch" regions are released when the C code frees them, so later regions reuse their bytes):

  1. Scratch: one distance histogram for the distance parameter search.
  2. The three BlockSplits' types and lengths arrays, sized for one block per symbol (max(1, n) entries, where n is the number of literals, commands or distance codes).
  3. Scratch: BrotliSplitBlock's literal / command code / distance code arrays and SplitByteVector's histograms, block ids, bitmaps and ClusterBlocks state.
  4. The command histograms, literal context map, literal histograms (room for 64 * num_literal_types), distance context map and distance histograms (room for 4 * num_distance_types).
  5. Scratch: the per-context literal and distance histograms that are then clustered, and BrotliClusterHistograms' state (cluster sizes, histogram pairs, etc).

After build_meta_block returns, the results (regions 2 and 4) are below wb_top, and wb[wb_top ..] is free for the caller (e.g. for storing the metablock) for as long as it needs the results.

Encoder TODO

  • Qualities 10 and 11 (Zopfli, the H10 binary tree hasher and BrotliBuildMetaBlock, which is already ported in encode_metablock.wuffs).
  • Large-window encoding at qualities 3 and above (it works at quality 2).
  • workbuf_len is a worst case. A future option could take the input length (like the C code's size hint) to give a tighter bound.
  • Custom and shared dictionaries (BrotliEncoderAttachPreparedDictionary).
  • Changing parameters mid-stream.

Large Window

Large-window brotli (an incompatible extension of RFC 7932, with window sizes up to (1 << 30) bytes) is enabled by the QUIRK_LARGE_WINDOW quirk. It mirrors libbrotlidec's BROTLI_DECODER_PARAM_LARGE_WINDOW parameter: it must be set before decoding starts (afterwards, set_quirk returns "#bad call sequence", like BrotliDecoderSetParameter failing once the decoder has left its BROTLI_STATE_UNINITED state). With the quirk set:

  • a stream that starts with the large-window WBITS escape is decoded as a large-window stream: the escape is followed by a reserved bit (that must be zero) and 6 window bits (that must be in [10 ..= 30]), otherwise the decoder fails with "#bad window bits".
  • a stream that does not start with that escape is decoded as standard brotli, exactly as without the quirk.
  • workbuf_len is (1 << 30) + 542 bytes (plus any dictionaries), the largest large-window window size plus slack. As before, the workbuf only needs to be as long as the stream's actual window size plus 542 bytes (plus any dictionaries). Without the quirk, it is (1 << 24) + 542 bytes (plus any dictionaries), as before.

For a large-window stream, like the C code, the distance alphabet's alphabet_size_max uses BROTLI_LARGE_MAX_DISTANCE_BITS (62) and its alphabet_size_limit comes from BrotliCalculateDistanceCodeLimit (at most 544 symbols, so that no distance exceeds BROTLI_MAX_ALLOWED_DISTANCE). Up to 29 extra distance bits are read (the C code's BrotliSafeReadBits32) and the distance is calculated with 64-bit arithmetic, like the C code's brotli_reg_t. The Huffman table stride for distance trees is sized for 544 symbols in both modes.

The DECODER_WORKBUF_LEN_MAX_INCL_WORST_CASE constant is now the overall worst case: (1 << 30) + 542 plus the maximum total dictionary length (0x7FFF_FFFF). The new DECODER_WORKBUF_LEN_STANDARD and DECODER_WORKBUF_LEN_LARGE_WINDOW constants give the window-only values.

Dictionaries

decoder.add_dictionary!(dict_type: base.u32, dict: roslice base.u8, workbuf: slice base.u8) base.status mirrors libbrotlidec's BrotliDecoderAttachDictionary. dict_type is DICTIONARY_TYPE_RAW (0, the C code's BROTLI_SHARED_DICTIONARY_RAW) or DICTIONARY_TYPE_SERIALIZED (1, BROTLI_SHARED_DICTIONARY_SERIALIZED). It must be called before decoding starts. It can be called multiple times.

Wuffs structs cannot hold pointers or slices, so add_dictionary copies the dictionary bytes into the workbuf. Every add_dictionary and transform_io call must be passed the same workbuf (or at least one whose first bytes hold the same dictionary bytes). The add_dictionary workbuf only needs to be long enough to hold all of the dictionaries added so far. Call workbuf_len after the last add_dictionary call: it grows by each dictionary's length.

The workbuf layout is:

[0 .. D)            the attached dictionaries, concatenated, where D is
                    the total length of all successfully added
                    dictionaries (raw or serialized, in full).
[D .. D + W + 542)  the history ring buffer (W = 1 << WBITS) and slack.

The dictionaries come first because their position should not depend on the stream's window size, which is only known once decoding has started.

Raw dictionaries are LZ77 prefix dictionaries. Like the C code (its BrotliDecoderCompoundDictionary and AttachCompoundDictionary, InitializeCompoundDictionaryCopy and CopyFromCompoundDictionary functions), at most 15 such "compound dictionary" chunks (raw dictionaries plus serialized dictionaries' LZ77 prefixes) can be attached. A backward reference distance d beyond the current maximum LZ77 distance m (but within BROTLI_MAX_ALLOWED_DISTANCE) refers to the compound dictionary when d - m - 1 is less than the compound dictionary's total size T, at address T - (d - m). A copy that would extend past the compound dictionary's end fails with "#bad compound dictionary". Otherwise, the static dictionary's address is d - m - 1 - T.

Serialized dictionaries are parsed and validated like BrotliSharedDictionaryAttach (DecodeSharedDictionary, DryParseDictionary, ParseDictionary, ParseWordList, ParseTransformsList and ParsePrefixSuffixTable in c/common/shared_dictionary.c): the 0x91 0x00 magic, an optional LZ77 prefix (at most 1073741823 bytes), up to 64 custom word lists (word lengths 4 to 31, at most 15 size bits per length), up to 64 custom transform lists (up to 256 prefix/suffix stringlets, up to 255 transforms, transform types up to BROTLI_TRANSFORM_SHIFT_ALL, with 16-bit parameters for the BROTLI_TRANSFORM_SHIFT_FIRST and BROTLI_TRANSFORM_SHIFT_ALL types), up to 64 (word list, transform list) combinations and an optional 64-entry context map. The parsed metadata lives in fixed-size decoder fields (wl_etc, tl_etc and sd_etc), with offsets into the copied bytes in the workbuf. Like the C code:

  • only one attached serialized dictionary can have custom word lists or transform lists (otherwise "#unsupported multiple custom static dictionaries"), and
  • attaching a serialized dictionary without custom word lists or transform lists (only an LZ77 prefix) resets the static dictionary to the built-in (RFC 7932) one, even if an earlier serialized dictionary had custom lists.

Static dictionary references then mirror ProcessCommandsInternal: the word list and transform list are selected by the literal context (BROTLI_CONTEXT(p1, p2, context_lookup)) through the context map (if enabled), with the C code's fall back to the other (word list, transform list) combinations when the address is out of range, and words are transformed like BrotliTransformDictionaryWord (including Shift for the shift transforms). Transformed words can be up to 541 bytes long.

add_dictionary statuses (the C code just returns BROTLI_FALSE):

Condition Wuffs status
decoding has started base."#bad call sequence"
unknown dict_type base."#bad argument"
more than 15 compound dictionary chunks "#too many compound dictionaries"
invalid serialized dictionary "#bad shared dictionary"
a second serialized dictionary with custom lists "#unsupported multiple custom static dictionaries"
more than 0x7FFF_FFFF bytes of dictionaries in total "#too much dictionary data"
workbuf shorter than the dictionaries so far plus this one base."#bad workbuf length"

Differences from the C code:

  • On failure, add_dictionary leaves the decoder unchanged. libbrotlidec's BrotliDecoderAttachDictionary can fail after partially updating its shared dictionary (e.g. after counting a serialized dictionary's LZ77 prefix or reading its number of word lists), which can affect later attach calls.
  • libbrotlicommon only parses serialized dictionaries when built with BROTLI_EXPERIMENTAL, which is not the default. A default build rejects every serialized dictionary. This package always accepts them, matching an experimental build. The mimic tests skip serialized dictionary cases when the linked libbrotlidec rejects them; they pass, with no skips, when linked against a BROTLI_EXPERIMENTAL build.
  • The C code holds the compound dictionary's total size in an int. This package rejects more than 0x7FFF_FFFF bytes of dictionaries in total (counting serialized dictionaries in full), where the C code would overflow.
  • BROTLI_DECODER_ERROR_DICTIONARY_NOT_SET cannot happen (see above).

Metadata Blocks

libbrotlidec can report metadata blocks' contents through callbacks (BrotliDecoderSetMetadataCallbacks). Wuffs code cannot call back into its caller, so there is no equivalent: metadata blocks are skipped (validated and consumed but not reported), exactly as libbrotlidec does without callbacks, so the decoded output is the same. A future quirk could expose metadata blocks, e.g. by suspending with a status when one starts.