8.7 KiB
Image Decoders
Regardless of the file format (GIF, JPEG, PNG, etc), every Wuffs image decoder
has a similar API. This document gives wuffs_gif__decoder__foo_bar examples,
but the gif could be replaced by jpeg, png, etc.
Some image formats (GIF) are animated, consisting of an image header and then N frames. The image header gives e.g. the overall image's width and height. Each frame consists of a frame header (e.g. frame rectangle bounds, display duration) and a payload (the pixels).
In general, there is one wuffs_base__image_config and then N pairs of
(wuffs_base__frame_config, frame). Non-animated (still) image formats are
treated the same way: that their N is 1 and their single frame's bounds equals
the overall image bounds.
To decode everything (without knowing N in advance) sequentially:
wuffs_base__io_buffer src = etc;
wuffs_gif__decoder* dec = etc;
wuffs_base__image_config ic;
wuffs_base__status status = wuffs_gif__decoder__decode_image_config(dec, &ic, &src);
// Error checking (inspecting the status variable) is not shown, for brevity.
// See the example programs, listed below, for how to handle errors.
// Allocate the pixel buffer, based on ic's width and height, etc.
wuffs_base__pixel_buffer pb = etc;
while (true) {
wuffs_base__frame_config fc;
status = wuffs_gif__decoder__decode_frame_config(dec, &fc, &src);
if (status.repr == wuffs_base__note__end_of_data) {
break;
}
// Ditto re error checking.
status = wuffs_gif__decoder__decode_frame(dec, &pb, &etc);
// Ditto re error checking.
}
The second argument to each decode_xxx method (&ic, &fc or &pb), is the
destination data structure to store the decoded information.
For random (instead of sequential) access to an image's frames, call
wuffs_gif__decoder__restart_frame(dec, i, io_pos) to prepare to decode the
i'th frame. Essentially, it restores the state to be at the top of the while
loop above. The wuffs_base__io_buffer's reader position will also need to be
set to the io_pos position in the source data stream. The position for the
i'th frame is calculated by the i'th decode_frame_config call and saved in
the frame_config. You can only call restart_frame after
decode_image_config is called, explicitly or implicitly (see below), as
decoding a single frame might require for-all-frames information like the
overall image dimensions and the global palette.
All of those decode_xxx calls are optional. For example, if
decode_image_config is not called, then the first decode_frame_config call
will implicitly parse and verify the image header, before parsing the first
frame's header. Similarly, you can call only decode_frame N times, without
calling decode_image_config or decode_frame_config, if you already know
metadata like N and each frame's rectangle bounds by some other means (e.g.
this is a first party, statically known image).
Specifically, starting with an unknown (but re-windable) animated image, if you
want to just find N (i.e. count the number of frames), you can loop calling
only the decode_frame_config method and avoid calling the more expensive
decode_frame method. For GIF, in terms of the underlying wire format, this
will skip over (instead of decompress) the LZW-encoded pixel data, which is
faster.
Those decode_xxx methods are also suspendible
coroutines. They will return early (with a status
code that is_suspendible and therefore isn't is_complete) if there isn't
enough source data to complete the operation: an incremental decode. Calling
decode_xxx again with additional source data will resume the previous
operation instead of starting a new one. Calling decode_yyy whilst
decode_xxx is suspended will result in an error.
Once an error is encountered, whether from invalid source data or from a
programming error, such as calling decode_yyy while suspended in
decode_xxx, all subsequent calls will be no-ops that return an error. To
reset the decoder into something that does productive work,
re-initialize and then, in order to be able to
call restart_frame, call decode_image_config. The io_buffer and its
associated stream will also need to be rewound.
Metadata
Images can also contain metadata (e.g. color profiles, time stamps). By
default, Wuffs' image decoders skip over metadata, but calling
set_report_metadata will opt in to having decode_image_config return early
when encountering metadata in the file. Calling set_report_metadata can be
done multiple times, each with a different
FourCC code such as 0x49434350 "ICCP" or
0x584D5020 "XMP ", to indicate what sorts of metadata the caller is
interested in. Conversely, when the parser encounters metadata (and returns a
"@metadata reported" status), call tell_me_more to
see what sort of metadata it is.
Some metadata is short and tell_me_more will also fill in its minfo: nptr more_information out parameter with "parsed metadata". For example, Gamma
Correction metadata is a single numerical value and Primary Chromaticities
metadata is only eight numbers. From C++ code, call the metadata_parsed__gama
or metadata_parsed__chrm methods to retrieve these value.
Some metadata is long (or at least variable length) and needs processing by a separate parser. For example, processing XMP metadata usually involves some sort of XML parser, regardless of what particular image format that XMP metadata was embedded in. Wuffs decoders will return "raw metadata" instead of parsing it themselves. Raw metadata is further sub-divided into two categories: "raw passthrough" and "raw transform". Either way, note that raw metadata might also be arranged in multiple (non-contiguous) chunks of the source data.
"Raw passthrough" means that the bytes in the wire format can be sent "as is"
to the separate parser. Call tell_me_more in a loop (the dst: io_writer
argument will be ignored) and metadata_raw_passthrough__range to identify a
range (a chunk) of the input stream. Divert the bytes in that range to the
separate parser (which should advance the io_buffer to the end of that range)
and repeat the loop as long as tell_me_more returned a "$even more
information" status.
"Raw transform" means that the bytes in the wire format have to be further
processed (e.g. decompressed) before sending them on to the separate parser.
That processing is done by the image_decoder callee, not the caller. Pass a
writable dst io_buffer to tell_me_more (where writable means that it has a
positive writer_length) and implementations should fill in that buffer with
post-transformed (e.g. decompressed) data to send onwards. Like any
io_transformer-like coroutine, this should be in a loop, as it may suspend
with "$short read" and "$short write" statuses.
Either way, break the loop (after handling the dst and minfo out
parameters) when tell_me_more returns a NULL status, meaning ok, when the
metadata is complete. Afterwards, call the original action (e.g.
decode_image_config) again to resume after the "@metadata reported" detour.
API Listing
In Wuffs syntax, the base.image_decoder methods are:
decode_frame?(dst: ptr pixel_buffer, src: io_reader, blend: pixel_blend, workbuf: slice u8, opts: nptr decode_frame_options)decode_frame_config?(dst: nptr frame_config, src: io_reader)decode_image_config?(dst: nptr image_config, src: io_reader)frame_dirty_rect() rect_ie_u32num_animation_loops() u32num_decoded_frame_configs() u64num_decoded_frames() u64restart_frame!(index: u64, io_position: u64) statusset_quirk_enabled!(quirk: u32, enabled: bool)set_report_metadata!(fourcc: u32, report: bool)tell_me_more?(dst: io_writer, minfo: nptr more_information, src: io_reader)workbuf_len() range_ii_u64
Implementations
Examples
Examples in other repositories:
- Skia, a 2-D graphics library used by the Android operating system and the Chromium web browser.
Quirks
Related Documentation
See also the general remarks on Wuffs' standard library.