From f881ee8c489bb090373f338a086ff49979300fab Mon Sep 17 00:00:00 2001
From: Rohit Jain start a new compression job, using same parameters from previous job.
- This is typically useful to skip dictionary loading stage, since it will re-use it in-place..
+ This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
Note that zcs must be init at least once before using ZSTD_resetCStream().
If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN.
If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end.
For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs,
but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead.
- @return : 0, or an error code (which can be tested using ZSTD_isError())
+ @return : 0, or an error code (which can be tested using ZSTD_isError())
+
Tell how many bytes are ready to be flushed immediately.
+ Useful for multithreading scenarios (nbWorkers >= 1).
+ Probe the oldest active job, defined as oldest job not yet entirely flushed,
+ and check its output buffer.
+ @return : amount of data stored in oldest job and ready to be flushed immediately.
+ if @return == 0, it means either :
+ + there is no active job (could be checked with ZSTD_frameProgression()), or
+ + oldest job is still actively compressing data,
+ but everything it has produced has also been flushed so far,
+ therefore flushing speed is currently limited by production speed of oldest job
+ irrespective of the speed of concurrent newer jobs.
+
+
@@ -600,22 +606,40 @@ size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict*
size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
typedef struct {
- unsigned long long ingested;
- unsigned long long consumed;
- unsigned long long produced;
- unsigned currentJobID;
+ unsigned long long ingested; /* nb input bytes read and buffered */
+ unsigned long long consumed; /* nb input bytes actually compressed */
+ unsigned long long produced; /* nb of compressed bytes generated and buffered */
+ unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */
+ unsigned currentJobID; /* MT only : latest started job nb */
+ unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */
} ZSTD_frameProgression;
+size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
+
+
Advanced Streaming decompression functions
typedef enum { DStream_p_maxWindowSize } ZSTD_DStreamParameter_e;
size_t ZSTD_setDStreamParameter(ZSTD_DStream* zds, ZSTD_DStreamParameter_e paramType, unsigned paramValue); /* obsolete : this API will be removed in a future version */
size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: no dictionary will be used if dict == NULL or dictSize < 8 */
@@ -1015,9 +1039,13 @@ size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx,
typedef enum {
- ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal conditions */
- ZSTD_e_flush, /* flush any data provided so far - frame will continue, future data can still reference previous data for better compression */
- ZSTD_e_end /* flush any remaining data and close current frame. Any additional data starts a new frame. */
+ ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
+ ZSTD_e_flush, /* flush any data provided so far,
+ * it creates (at least) one new block, that can be decoded immediately on reception;
+ * frame will continue: any future data can still reference previously compressed data, improving compression. */
+ ZSTD_e_end /* flush any remaining data and close current frame.
+ * any additional data starts a new frame.
+ * each frame is independent (does not reference any content from previous frame). */
} ZSTD_EndDirective;
size_t ZSTD_compress_generic (ZSTD_CCtx* cctx,
diff --git a/programs/util.c b/programs/util.c
index 510576448..dfe2c8ab2 100644
--- a/programs/util.c
+++ b/programs/util.c
@@ -127,6 +127,196 @@ U64 UTIL_getTotalFileSize(const char* const * const fileNamesTable, unsigned nbF
return error ? UTIL_FILESIZE_UNKNOWN : total;
}
+ #ifdef _WIN32
+int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
+{
+ char* path;
+ int dirLength, fnameLength, pathLength, nbFiles = 0;
+ WIN32_FIND_DATAA cFile;
+ HANDLE hFile;
+
+ dirLength = (int)strlen(dirName);
+ path = (char*) malloc(dirLength + 3);
+ if (!path) return 0;
+
+ memcpy(path, dirName, dirLength);
+ path[dirLength] = '\\';
+ path[dirLength+1] = '*';
+ path[dirLength+2] = 0;
+
+ hFile=FindFirstFileA(path, &cFile);
+ if (hFile == INVALID_HANDLE_VALUE) {
+ UTIL_DISPLAYLEVEL(1, "Cannot open directory '%s'\n", dirName);
+ return 0;
+ }
+ free(path);
+
+ do {
+ fnameLength = (int)strlen(cFile.cFileName);
+ path = (char*) malloc(dirLength + fnameLength + 2);
+ if (!path) { FindClose(hFile); return 0; }
+ memcpy(path, dirName, dirLength);
+ path[dirLength] = '\\';
+ memcpy(path+dirLength+1, cFile.cFileName, fnameLength);
+ pathLength = dirLength+1+fnameLength;
+ path[pathLength] = 0;
+ if (cFile.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY) {
+ if (strcmp (cFile.cFileName, "..") == 0 ||
+ strcmp (cFile.cFileName, ".") == 0) continue;
+
+ nbFiles += UTIL_prepareFileList(path, bufStart, pos, bufEnd, followLinks); /* Recursively call "UTIL_prepareFileList" with the new path. */
+ if (*bufStart == NULL) { free(path); FindClose(hFile); return 0; }
+ }
+ else if ((cFile.dwFileAttributes & FILE_ATTRIBUTE_NORMAL) || (cFile.dwFileAttributes & FILE_ATTRIBUTE_ARCHIVE) || (cFile.dwFileAttributes & FILE_ATTRIBUTE_COMPRESSED)) {
+ if (*bufStart + *pos + pathLength >= *bufEnd) {
+ ptrdiff_t newListSize = (*bufEnd - *bufStart) + LIST_SIZE_INCREASE;
+ *bufStart = (char*)UTIL_realloc(*bufStart, newListSize);
+ *bufEnd = *bufStart + newListSize;
+ if (*bufStart == NULL) { free(path); FindClose(hFile); return 0; }
+ }
+ if (*bufStart + *pos + pathLength < *bufEnd) {
+ strncpy(*bufStart + *pos, path, *bufEnd - (*bufStart + *pos));
+ *pos += pathLength + 1;
+ nbFiles++;
+ }
+ }
+ free(path);
+ } while (FindNextFileA(hFile, &cFile));
+
+ FindClose(hFile);
+ return nbFiles;
+}
+
+#elif defined(__linux__) || (PLATFORM_POSIX_VERSION >= 200112L) /* opendir, readdir require POSIX.1-2001 */
+
+int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
+{
+ DIR *dir;
+ struct dirent *entry;
+ char* path;
+ int dirLength, fnameLength, pathLength, nbFiles = 0;
+
+ if (!(dir = opendir(dirName))) {
+ UTIL_DISPLAYLEVEL(1, "Cannot open directory '%s': %s\n", dirName, strerror(errno));
+ return 0;
+ }
+
+ dirLength = (int)strlen(dirName);
+ errno = 0;
+ while ((entry = readdir(dir)) != NULL) {
+ if (strcmp (entry->d_name, "..") == 0 ||
+ strcmp (entry->d_name, ".") == 0) continue;
+ fnameLength = (int)strlen(entry->d_name);
+ path = (char*) malloc(dirLength + fnameLength + 2);
+ if (!path) { closedir(dir); return 0; }
+ memcpy(path, dirName, dirLength);
+
+ path[dirLength] = '/';
+ memcpy(path+dirLength+1, entry->d_name, fnameLength);
+ pathLength = dirLength+1+fnameLength;
+ path[pathLength] = 0;
+
+ if (!followLinks && UTIL_isLink(path)) {
+ UTIL_DISPLAYLEVEL(2, "Warning : %s is a symbolic link, ignoring\n", path);
+ continue;
+ }
+
+ if (UTIL_isDirectory(path)) {
+ nbFiles += UTIL_prepareFileList(path, bufStart, pos, bufEnd, followLinks); /* Recursively call "UTIL_prepareFileList" with the new path. */
+ if (*bufStart == NULL) { free(path); closedir(dir); return 0; }
+ } else {
+ if (*bufStart + *pos + pathLength >= *bufEnd) {
+ ptrdiff_t newListSize = (*bufEnd - *bufStart) + LIST_SIZE_INCREASE;
+ *bufStart = (char*)UTIL_realloc(*bufStart, newListSize);
+ *bufEnd = *bufStart + newListSize;
+ if (*bufStart == NULL) { free(path); closedir(dir); return 0; }
+ }
+ if (*bufStart + *pos + pathLength < *bufEnd) {
+ strncpy(*bufStart + *pos, path, *bufEnd - (*bufStart + *pos));
+ *pos += pathLength + 1;
+ nbFiles++;
+ }
+ }
+ free(path);
+ errno = 0; /* clear errno after UTIL_isDirectory, UTIL_prepareFileList */
+ }
+
+ if (errno != 0) {
+ UTIL_DISPLAYLEVEL(1, "readdir(%s) error: %s\n", dirName, strerror(errno));
+ free(*bufStart);
+ *bufStart = NULL;
+ }
+ closedir(dir);
+ return nbFiles;
+}
+
+#else
+
+int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
+{
+ (void)bufStart; (void)bufEnd; (void)pos; (void)followLinks;
+ UTIL_DISPLAYLEVEL(1, "Directory %s ignored (compiled without _WIN32 or _POSIX_C_SOURCE)\n", dirName);
+ return 0;
+}
+
+#endif /* #ifdef _WIN32 */
+
+/*
+ * UTIL_createFileList - takes a list of files and directories (params: inputNames, inputNamesNb), scans directories,
+ * and returns a new list of files (params: return value, allocatedBuffer, allocatedNamesNb).
+ * After finishing usage of the list the structures should be freed with UTIL_freeFileList(params: return value, allocatedBuffer)
+ * In case of error UTIL_createFileList returns NULL and UTIL_freeFileList should not be called.
+ */
+const char**
+UTIL_createFileList(const char **inputNames, unsigned inputNamesNb,
+ char** allocatedBuffer, unsigned* allocatedNamesNb,
+ int followLinks)
+{
+ size_t pos;
+ unsigned i, nbFiles;
+ char* buf = (char*)malloc(LIST_SIZE_INCREASE);
+ char* bufend = buf + LIST_SIZE_INCREASE;
+ const char** fileTable;
+
+ if (!buf) return NULL;
+
+ for (i=0, pos=0, nbFiles=0; i= bufend) {
+ ptrdiff_t newListSize = (bufend - buf) + LIST_SIZE_INCREASE;
+ buf = (char*)UTIL_realloc(buf, newListSize);
+ bufend = buf + newListSize;
+ if (!buf) return NULL;
+ }
+ if (buf + pos + len < bufend) {
+ strncpy(buf + pos, inputNames[i], bufend - (buf + pos));
+ pos += len + 1;
+ nbFiles++;
+ }
+ } else {
+ nbFiles += UTIL_prepareFileList(inputNames[i], &buf, &pos, &bufend, followLinks);
+ if (buf == NULL) return NULL;
+ } }
+
+ if (nbFiles == 0) { free(buf); return NULL; }
+
+ fileTable = (const char**)malloc((nbFiles+1) * sizeof(const char*));
+ if (!fileTable) { free(buf); return NULL; }
+
+ for (i=0, pos=0; i bufend) { free(buf); free((void*)fileTable); return NULL; }
+
+ *allocatedBuffer = buf;
+ *allocatedNamesNb = nbFiles;
+
+ return fileTable;
+}
+
/*-****************************************
* Time functions
******************************************/
diff --git a/programs/util.h b/programs/util.h
index 4e3586588..ca8dcfc4a 100644
--- a/programs/util.h
+++ b/programs/util.h
@@ -207,143 +207,14 @@ UTIL_STATIC void *UTIL_realloc(void *ptr, size_t size)
return NULL;
}
+int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks);
#ifdef _WIN32
# define UTIL_HAS_CREATEFILELIST
-
-UTIL_STATIC int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
-{
- char* path;
- int dirLength, fnameLength, pathLength, nbFiles = 0;
- WIN32_FIND_DATAA cFile;
- HANDLE hFile;
-
- dirLength = (int)strlen(dirName);
- path = (char*) malloc(dirLength + 3);
- if (!path) return 0;
-
- memcpy(path, dirName, dirLength);
- path[dirLength] = '\\';
- path[dirLength+1] = '*';
- path[dirLength+2] = 0;
-
- hFile=FindFirstFileA(path, &cFile);
- if (hFile == INVALID_HANDLE_VALUE) {
- UTIL_DISPLAYLEVEL(1, "Cannot open directory '%s'\n", dirName);
- return 0;
- }
- free(path);
-
- do {
- fnameLength = (int)strlen(cFile.cFileName);
- path = (char*) malloc(dirLength + fnameLength + 2);
- if (!path) { FindClose(hFile); return 0; }
- memcpy(path, dirName, dirLength);
- path[dirLength] = '\\';
- memcpy(path+dirLength+1, cFile.cFileName, fnameLength);
- pathLength = dirLength+1+fnameLength;
- path[pathLength] = 0;
- if (cFile.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY) {
- if (strcmp (cFile.cFileName, "..") == 0 ||
- strcmp (cFile.cFileName, ".") == 0) continue;
-
- nbFiles += UTIL_prepareFileList(path, bufStart, pos, bufEnd, followLinks); /* Recursively call "UTIL_prepareFileList" with the new path. */
- if (*bufStart == NULL) { free(path); FindClose(hFile); return 0; }
- }
- else if ((cFile.dwFileAttributes & FILE_ATTRIBUTE_NORMAL) || (cFile.dwFileAttributes & FILE_ATTRIBUTE_ARCHIVE) || (cFile.dwFileAttributes & FILE_ATTRIBUTE_COMPRESSED)) {
- if (*bufStart + *pos + pathLength >= *bufEnd) {
- ptrdiff_t newListSize = (*bufEnd - *bufStart) + LIST_SIZE_INCREASE;
- *bufStart = (char*)UTIL_realloc(*bufStart, newListSize);
- *bufEnd = *bufStart + newListSize;
- if (*bufStart == NULL) { free(path); FindClose(hFile); return 0; }
- }
- if (*bufStart + *pos + pathLength < *bufEnd) {
- strncpy(*bufStart + *pos, path, *bufEnd - (*bufStart + *pos));
- *pos += pathLength + 1;
- nbFiles++;
- }
- }
- free(path);
- } while (FindNextFileA(hFile, &cFile));
-
- FindClose(hFile);
- return nbFiles;
-}
-
#elif defined(__linux__) || (PLATFORM_POSIX_VERSION >= 200112L) /* opendir, readdir require POSIX.1-2001 */
# define UTIL_HAS_CREATEFILELIST
# include /* opendir, readdir */
# include /* strerror, memcpy */
-
-UTIL_STATIC int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
-{
- DIR *dir;
- struct dirent *entry;
- char* path;
- int dirLength, fnameLength, pathLength, nbFiles = 0;
-
- if (!(dir = opendir(dirName))) {
- UTIL_DISPLAYLEVEL(1, "Cannot open directory '%s': %s\n", dirName, strerror(errno));
- return 0;
- }
-
- dirLength = (int)strlen(dirName);
- errno = 0;
- while ((entry = readdir(dir)) != NULL) {
- if (strcmp (entry->d_name, "..") == 0 ||
- strcmp (entry->d_name, ".") == 0) continue;
- fnameLength = (int)strlen(entry->d_name);
- path = (char*) malloc(dirLength + fnameLength + 2);
- if (!path) { closedir(dir); return 0; }
- memcpy(path, dirName, dirLength);
-
- path[dirLength] = '/';
- memcpy(path+dirLength+1, entry->d_name, fnameLength);
- pathLength = dirLength+1+fnameLength;
- path[pathLength] = 0;
-
- if (!followLinks && UTIL_isLink(path)) {
- UTIL_DISPLAYLEVEL(2, "Warning : %s is a symbolic link, ignoring\n", path);
- continue;
- }
-
- if (UTIL_isDirectory(path)) {
- nbFiles += UTIL_prepareFileList(path, bufStart, pos, bufEnd, followLinks); /* Recursively call "UTIL_prepareFileList" with the new path. */
- if (*bufStart == NULL) { free(path); closedir(dir); return 0; }
- } else {
- if (*bufStart + *pos + pathLength >= *bufEnd) {
- ptrdiff_t newListSize = (*bufEnd - *bufStart) + LIST_SIZE_INCREASE;
- *bufStart = (char*)UTIL_realloc(*bufStart, newListSize);
- *bufEnd = *bufStart + newListSize;
- if (*bufStart == NULL) { free(path); closedir(dir); return 0; }
- }
- if (*bufStart + *pos + pathLength < *bufEnd) {
- strncpy(*bufStart + *pos, path, *bufEnd - (*bufStart + *pos));
- *pos += pathLength + 1;
- nbFiles++;
- }
- }
- free(path);
- errno = 0; /* clear errno after UTIL_isDirectory, UTIL_prepareFileList */
- }
-
- if (errno != 0) {
- UTIL_DISPLAYLEVEL(1, "readdir(%s) error: %s\n", dirName, strerror(errno));
- free(*bufStart);
- *bufStart = NULL;
- }
- closedir(dir);
- return nbFiles;
-}
-
#else
-
-UTIL_STATIC int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
-{
- (void)bufStart; (void)bufEnd; (void)pos; (void)followLinks;
- UTIL_DISPLAYLEVEL(1, "Directory %s ignored (compiled without _WIN32 or _POSIX_C_SOURCE)\n", dirName);
- return 0;
-}
-
#endif /* #ifdef _WIN32 */
/*
@@ -352,56 +223,10 @@ UTIL_STATIC int UTIL_prepareFileList(const char *dirName, char** bufStart, size_
* After finishing usage of the list the structures should be freed with UTIL_freeFileList(params: return value, allocatedBuffer)
* In case of error UTIL_createFileList returns NULL and UTIL_freeFileList should not be called.
*/
-UTIL_STATIC const char**
+const char**
UTIL_createFileList(const char **inputNames, unsigned inputNamesNb,
char** allocatedBuffer, unsigned* allocatedNamesNb,
- int followLinks)
-{
- size_t pos;
- unsigned i, nbFiles;
- char* buf = (char*)malloc(LIST_SIZE_INCREASE);
- char* bufend = buf + LIST_SIZE_INCREASE;
- const char** fileTable;
-
- if (!buf) return NULL;
-
- for (i=0, pos=0, nbFiles=0; i= bufend) {
- ptrdiff_t newListSize = (bufend - buf) + LIST_SIZE_INCREASE;
- buf = (char*)UTIL_realloc(buf, newListSize);
- bufend = buf + newListSize;
- if (!buf) return NULL;
- }
- if (buf + pos + len < bufend) {
- strncpy(buf + pos, inputNames[i], bufend - (buf + pos));
- pos += len + 1;
- nbFiles++;
- }
- } else {
- nbFiles += UTIL_prepareFileList(inputNames[i], &buf, &pos, &bufend, followLinks);
- if (buf == NULL) return NULL;
- } }
-
- if (nbFiles == 0) { free(buf); return NULL; }
-
- fileTable = (const char**)malloc((nbFiles+1) * sizeof(const char*));
- if (!fileTable) { free(buf); return NULL; }
-
- for (i=0, pos=0; i bufend) { free(buf); free((void*)fileTable); return NULL; }
-
- *allocatedBuffer = buf;
- *allocatedNamesNb = nbFiles;
-
- return fileTable;
-}
-
+ int followLinks);
UTIL_STATIC void UTIL_freeFileList(const char** filenameTable, char* allocatedBuffer)
{
diff --git a/zlibWrapper/Makefile b/zlibWrapper/Makefile
index c1896f8b8..ba69f1992 100644
--- a/zlibWrapper/Makefile
+++ b/zlibWrapper/Makefile
@@ -88,7 +88,7 @@ fitblk: $(EXAMPLE_PATH)/fitblk.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(ZSTDLI
fitblk_zstd: $(EXAMPLE_PATH)/fitblk.o $(ZLIBWRAPPER_PATH)/zstdTurnedOn_zlibwrapper.o $(ZSTDLIBRARY)
$(CC) $(LDFLAGS) $^ $(ZLIB_LIBRARY) -o $@
-zwrapbench: $(EXAMPLE_PATH)/zwrapbench.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(PROGRAMS_PATH)/datagen.o $(ZSTDLIBRARY)
+zwrapbench: $(EXAMPLE_PATH)/zwrapbench.o $(ZLIBWRAPPER_PATH)/zstd_zlibwrapper.o $(PROGRAMS_PATH)/util.o $(PROGRAMS_PATH)/datagen.o $(ZSTDLIBRARY)
$(CC) $(LDFLAGS) $^ $(ZLIB_LIBRARY) -o $@
From a47f6e6f2d6dbb6f272034294361b8de6b660b76 Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Thu, 11 Oct 2018 16:51:29 -0700
Subject: [PATCH 05/13] Removing static and making extern
---
programs/util.c | 5 +++++
programs/util.h | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/programs/util.c b/programs/util.c
index dfe2c8ab2..067e76e24 100644
--- a/programs/util.c
+++ b/programs/util.c
@@ -317,6 +317,11 @@ UTIL_createFileList(const char **inputNames, unsigned inputNamesNb,
return fileTable;
}
+/*-****************************************
+* Console log
+******************************************/
+int g_utilDisplayLevel;
+
/*-****************************************
* Time functions
******************************************/
diff --git a/programs/util.h b/programs/util.h
index ca8dcfc4a..52ccf3061 100644
--- a/programs/util.h
+++ b/programs/util.h
@@ -110,7 +110,7 @@ extern "C" {
/*-****************************************
* Console log
******************************************/
-static int g_utilDisplayLevel;
+extern int g_utilDisplayLevel;
#define UTIL_DISPLAY(...) fprintf(stderr, __VA_ARGS__)
#define UTIL_DISPLAYLEVEL(l, ...) { if (g_utilDisplayLevel>=l) { UTIL_DISPLAY(__VA_ARGS__); } }
From 23e727e3a24a9428109198224d768dcda48c935d Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Thu, 11 Oct 2018 17:08:42 -0700
Subject: [PATCH 06/13] Fixing regressiontest makefile
---
tests/fuzz/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tests/fuzz/Makefile b/tests/fuzz/Makefile
index d9b00fd2a..22617ed5c 100644
--- a/tests/fuzz/Makefile
+++ b/tests/fuzz/Makefile
@@ -52,7 +52,7 @@ FUZZ_SRC := \
$(ZSTDCOMMON_SRC) \
$(ZSTDCOMP_SRC)
-FUZZ_OBJ := $(patsubst %.c,%.o, $(wildcard $(FUZZ_SRC)))
+FUZZ_OBJ := $(patsubst %.c,%.o, $(wildcard $(FUZZ_SRC))) $(PRGDIR)/util.o
.PHONY: default all clean cleanall
@@ -90,7 +90,7 @@ stream_decompress: $(FUZZ_HEADERS) $(FUZZ_OBJ) stream_decompress.o
block_decompress: $(FUZZ_HEADERS) $(FUZZ_OBJ) block_decompress.o
$(CXX) $(FUZZ_TARGET_FLAGS) $(FUZZ_OBJ) block_decompress.o $(LIB_FUZZING_ENGINE) -o $@
-libregression.a: $(FUZZ_HEADERS) $(PRGDIR)/util.h regression_driver.o
+libregression.a: $(FUZZ_HEADERS) $(PRGDIR)/util.h $(PRGDIR)/util.c regression_driver.o
$(AR) $(FUZZ_ARFLAGS) $@ regression_driver.o
# Install libfuzzer (not usable for MSAN testing)
From 91b2fed8f8dc500dc7686060f5c34131e16d64dc Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Thu, 11 Oct 2018 17:34:47 -0700
Subject: [PATCH 07/13] Moving more function to the new C file
---
programs/util.c | 196 +++++++++++++++++++++++++++++++++++++++++
programs/util.h | 227 ++----------------------------------------------
2 files changed, 202 insertions(+), 221 deletions(-)
diff --git a/programs/util.c b/programs/util.c
index 067e76e24..5fde1e00a 100644
--- a/programs/util.c
+++ b/programs/util.c
@@ -452,6 +452,202 @@ void UTIL_waitForNextTick(void)
} while (UTIL_getSpanTimeNano(clockStart, clockEnd) == 0);
}
+/* count the number of physical cores */
+#if defined(_WIN32) || defined(WIN32)
+
+#include
+
+typedef BOOL(WINAPI* LPFN_GLPI)(PSYSTEM_LOGICAL_PROCESSOR_INFORMATION, PDWORD);
+
+int UTIL_countPhysicalCores(void)
+{
+ static int numPhysicalCores = 0;
+ if (numPhysicalCores != 0) return numPhysicalCores;
+
+ { LPFN_GLPI glpi;
+ BOOL done = FALSE;
+ PSYSTEM_LOGICAL_PROCESSOR_INFORMATION buffer = NULL;
+ PSYSTEM_LOGICAL_PROCESSOR_INFORMATION ptr = NULL;
+ DWORD returnLength = 0;
+ size_t byteOffset = 0;
+
+ glpi = (LPFN_GLPI)GetProcAddress(GetModuleHandle(TEXT("kernel32")),
+ "GetLogicalProcessorInformation");
+
+ if (glpi == NULL) {
+ goto failed;
+ }
+
+ while(!done) {
+ DWORD rc = glpi(buffer, &returnLength);
+ if (FALSE == rc) {
+ if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) {
+ if (buffer)
+ free(buffer);
+ buffer = (PSYSTEM_LOGICAL_PROCESSOR_INFORMATION)malloc(returnLength);
+
+ if (buffer == NULL) {
+ perror("zstd");
+ exit(1);
+ }
+ } else {
+ /* some other error */
+ goto failed;
+ }
+ } else {
+ done = TRUE;
+ }
+ }
+
+ ptr = buffer;
+
+ while (byteOffset + sizeof(SYSTEM_LOGICAL_PROCESSOR_INFORMATION) <= returnLength) {
+
+ if (ptr->Relationship == RelationProcessorCore) {
+ numPhysicalCores++;
+ }
+
+ ptr++;
+ byteOffset += sizeof(SYSTEM_LOGICAL_PROCESSOR_INFORMATION);
+ }
+
+ free(buffer);
+
+ return numPhysicalCores;
+ }
+
+failed:
+ /* try to fall back on GetSystemInfo */
+ { SYSTEM_INFO sysinfo;
+ GetSystemInfo(&sysinfo);
+ numPhysicalCores = sysinfo.dwNumberOfProcessors;
+ if (numPhysicalCores == 0) numPhysicalCores = 1; /* just in case */
+ }
+ return numPhysicalCores;
+}
+
+#elif defined(__APPLE__)
+
+#include
+
+/* Use apple-provided syscall
+ * see: man 3 sysctl */
+int UTIL_countPhysicalCores(void)
+{
+ static S32 numPhysicalCores = 0; /* apple specifies int32_t */
+ if (numPhysicalCores != 0) return numPhysicalCores;
+
+ { size_t size = sizeof(S32);
+ int const ret = sysctlbyname("hw.physicalcpu", &numPhysicalCores, &size, NULL, 0);
+ if (ret != 0) {
+ if (errno == ENOENT) {
+ /* entry not present, fall back on 1 */
+ numPhysicalCores = 1;
+ } else {
+ perror("zstd: can't get number of physical cpus");
+ exit(1);
+ }
+ }
+
+ return numPhysicalCores;
+ }
+}
+
+#elif defined(__linux__)
+
+/* parse /proc/cpuinfo
+ * siblings / cpu cores should give hyperthreading ratio
+ * otherwise fall back on sysconf */
+int UTIL_countPhysicalCores(void)
+{
+ static int numPhysicalCores = 0;
+
+ if (numPhysicalCores != 0) return numPhysicalCores;
+
+ numPhysicalCores = (int)sysconf(_SC_NPROCESSORS_ONLN);
+ if (numPhysicalCores == -1) {
+ /* value not queryable, fall back on 1 */
+ return numPhysicalCores = 1;
+ }
+
+ /* try to determine if there's hyperthreading */
+ { FILE* const cpuinfo = fopen("/proc/cpuinfo", "r");
+#define BUF_SIZE 80
+ char buff[BUF_SIZE];
+
+ int siblings = 0;
+ int cpu_cores = 0;
+ int ratio = 1;
+
+ if (cpuinfo == NULL) {
+ /* fall back on the sysconf value */
+ return numPhysicalCores;
+ }
+
+ /* assume the cpu cores/siblings values will be constant across all
+ * present processors */
+ while (!feof(cpuinfo)) {
+ if (fgets(buff, BUF_SIZE, cpuinfo) != NULL) {
+ if (strncmp(buff, "siblings", 8) == 0) {
+ const char* const sep = strchr(buff, ':');
+ if (*sep == '\0') {
+ /* formatting was broken? */
+ goto failed;
+ }
+
+ siblings = atoi(sep + 1);
+ }
+ if (strncmp(buff, "cpu cores", 9) == 0) {
+ const char* const sep = strchr(buff, ':');
+ if (*sep == '\0') {
+ /* formatting was broken? */
+ goto failed;
+ }
+
+ cpu_cores = atoi(sep + 1);
+ }
+ } else if (ferror(cpuinfo)) {
+ /* fall back on the sysconf value */
+ goto failed;
+ }
+ }
+ if (siblings && cpu_cores) {
+ ratio = siblings / cpu_cores;
+ }
+failed:
+ fclose(cpuinfo);
+ return numPhysicalCores = numPhysicalCores / ratio;
+ }
+}
+
+#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__)
+
+/* Use apple-provided syscall
+ * see: man 3 sysctl */
+int UTIL_countPhysicalCores(void)
+{
+ static int numPhysicalCores = 0;
+
+ if (numPhysicalCores != 0) return numPhysicalCores;
+
+ numPhysicalCores = (int)sysconf(_SC_NPROCESSORS_ONLN);
+ if (numPhysicalCores == -1) {
+ /* value not queryable, fall back on 1 */
+ return numPhysicalCores = 1;
+ }
+ return numPhysicalCores;
+}
+
+#else
+
+int UTIL_countPhysicalCores(void)
+{
+ /* assume 1 */
+ return 1;
+}
+
+#endif
+
#if defined (__cplusplus)
}
#endif
diff --git a/programs/util.h b/programs/util.h
index 52ccf3061..d61ff526b 100644
--- a/programs/util.h
+++ b/programs/util.h
@@ -16,7 +16,6 @@ extern "C" {
#endif
-
/*-****************************************
* Dependencies
******************************************/
@@ -39,7 +38,7 @@ extern "C" {
#include "mem.h" /* U32, U64 */
-/* ************************************************************
+/*-************************************************************
* Avoid fseek()'s 2GiB barrier with MSVC, macOS, *BSD, MinGW
***************************************************************/
#if defined(_MSC_VER) && (_MSC_VER >= 1400)
@@ -84,7 +83,7 @@ extern "C" {
#endif
-/* *************************************
+/*-*************************************
* Constants
***************************************/
#define LIST_SIZE_INCREASE (8*1024)
@@ -121,21 +120,10 @@ extern int g_utilDisplayLevel;
#if defined(_WIN32) /* Windows */
#define UTIL_TIME_INITIALIZER { { 0, 0 } }
typedef LARGE_INTEGER UTIL_time_t;
-
- UTIL_time_t UTIL_getTime(void);
- U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd);
- U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd);
-
#elif defined(__APPLE__) && defined(__MACH__)
-
#include
#define UTIL_TIME_INITIALIZER 0
typedef U64 UTIL_time_t;
-
- UTIL_time_t UTIL_getTime(void);
- U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd);
- U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd);
-
#elif (PLATFORM_POSIX_VERSION >= 200112L) \
&& (defined(__UCLIBC__) \
|| (defined(__GLIBC__) \
@@ -146,21 +134,14 @@ extern int g_utilDisplayLevel;
typedef struct timespec UTIL_freq_t;
typedef struct timespec UTIL_time_t;
- UTIL_time_t UTIL_getTime(void);
-
UTIL_time_t UTIL_getSpanTime(UTIL_time_t begin, UTIL_time_t end);
-
- U64 UTIL_getSpanTimeMicro(UTIL_time_t begin, UTIL_time_t end);
-
- U64 UTIL_getSpanTimeNano(UTIL_time_t begin, UTIL_time_t end);
-
#else /* relies on standard C (note : clock_t measurements can be wrong when using multi-threading) */
typedef clock_t UTIL_time_t;
#define UTIL_TIME_INITIALIZER 0
- UTIL_time_t UTIL_getTime(void);
- U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd);
- U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd);
#endif
+UTIL_time_t UTIL_getTime(void);
+U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd);
+U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd);
#define SEC_TO_MICRO 1000000
@@ -171,8 +152,6 @@ U64 UTIL_clockSpanMicro(UTIL_time_t clockStart);
U64 UTIL_clockSpanNano(UTIL_time_t clockStart);
void UTIL_waitForNextTick(void);
-
-
/*-****************************************
* File functions
******************************************/
@@ -234,201 +213,7 @@ UTIL_STATIC void UTIL_freeFileList(const char** filenameTable, char* allocatedBu
if (filenameTable) free((void*)filenameTable);
}
-/* count the number of physical cores */
-#if defined(_WIN32) || defined(WIN32)
-
-#include
-
-typedef BOOL(WINAPI* LPFN_GLPI)(PSYSTEM_LOGICAL_PROCESSOR_INFORMATION, PDWORD);
-
-UTIL_STATIC int UTIL_countPhysicalCores(void)
-{
- static int numPhysicalCores = 0;
- if (numPhysicalCores != 0) return numPhysicalCores;
-
- { LPFN_GLPI glpi;
- BOOL done = FALSE;
- PSYSTEM_LOGICAL_PROCESSOR_INFORMATION buffer = NULL;
- PSYSTEM_LOGICAL_PROCESSOR_INFORMATION ptr = NULL;
- DWORD returnLength = 0;
- size_t byteOffset = 0;
-
- glpi = (LPFN_GLPI)GetProcAddress(GetModuleHandle(TEXT("kernel32")),
- "GetLogicalProcessorInformation");
-
- if (glpi == NULL) {
- goto failed;
- }
-
- while(!done) {
- DWORD rc = glpi(buffer, &returnLength);
- if (FALSE == rc) {
- if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) {
- if (buffer)
- free(buffer);
- buffer = (PSYSTEM_LOGICAL_PROCESSOR_INFORMATION)malloc(returnLength);
-
- if (buffer == NULL) {
- perror("zstd");
- exit(1);
- }
- } else {
- /* some other error */
- goto failed;
- }
- } else {
- done = TRUE;
- }
- }
-
- ptr = buffer;
-
- while (byteOffset + sizeof(SYSTEM_LOGICAL_PROCESSOR_INFORMATION) <= returnLength) {
-
- if (ptr->Relationship == RelationProcessorCore) {
- numPhysicalCores++;
- }
-
- ptr++;
- byteOffset += sizeof(SYSTEM_LOGICAL_PROCESSOR_INFORMATION);
- }
-
- free(buffer);
-
- return numPhysicalCores;
- }
-
-failed:
- /* try to fall back on GetSystemInfo */
- { SYSTEM_INFO sysinfo;
- GetSystemInfo(&sysinfo);
- numPhysicalCores = sysinfo.dwNumberOfProcessors;
- if (numPhysicalCores == 0) numPhysicalCores = 1; /* just in case */
- }
- return numPhysicalCores;
-}
-
-#elif defined(__APPLE__)
-
-#include
-
-/* Use apple-provided syscall
- * see: man 3 sysctl */
-UTIL_STATIC int UTIL_countPhysicalCores(void)
-{
- static S32 numPhysicalCores = 0; /* apple specifies int32_t */
- if (numPhysicalCores != 0) return numPhysicalCores;
-
- { size_t size = sizeof(S32);
- int const ret = sysctlbyname("hw.physicalcpu", &numPhysicalCores, &size, NULL, 0);
- if (ret != 0) {
- if (errno == ENOENT) {
- /* entry not present, fall back on 1 */
- numPhysicalCores = 1;
- } else {
- perror("zstd: can't get number of physical cpus");
- exit(1);
- }
- }
-
- return numPhysicalCores;
- }
-}
-
-#elif defined(__linux__)
-
-/* parse /proc/cpuinfo
- * siblings / cpu cores should give hyperthreading ratio
- * otherwise fall back on sysconf */
-UTIL_STATIC int UTIL_countPhysicalCores(void)
-{
- static int numPhysicalCores = 0;
-
- if (numPhysicalCores != 0) return numPhysicalCores;
-
- numPhysicalCores = (int)sysconf(_SC_NPROCESSORS_ONLN);
- if (numPhysicalCores == -1) {
- /* value not queryable, fall back on 1 */
- return numPhysicalCores = 1;
- }
-
- /* try to determine if there's hyperthreading */
- { FILE* const cpuinfo = fopen("/proc/cpuinfo", "r");
-#define BUF_SIZE 80
- char buff[BUF_SIZE];
-
- int siblings = 0;
- int cpu_cores = 0;
- int ratio = 1;
-
- if (cpuinfo == NULL) {
- /* fall back on the sysconf value */
- return numPhysicalCores;
- }
-
- /* assume the cpu cores/siblings values will be constant across all
- * present processors */
- while (!feof(cpuinfo)) {
- if (fgets(buff, BUF_SIZE, cpuinfo) != NULL) {
- if (strncmp(buff, "siblings", 8) == 0) {
- const char* const sep = strchr(buff, ':');
- if (*sep == '\0') {
- /* formatting was broken? */
- goto failed;
- }
-
- siblings = atoi(sep + 1);
- }
- if (strncmp(buff, "cpu cores", 9) == 0) {
- const char* const sep = strchr(buff, ':');
- if (*sep == '\0') {
- /* formatting was broken? */
- goto failed;
- }
-
- cpu_cores = atoi(sep + 1);
- }
- } else if (ferror(cpuinfo)) {
- /* fall back on the sysconf value */
- goto failed;
- }
- }
- if (siblings && cpu_cores) {
- ratio = siblings / cpu_cores;
- }
-failed:
- fclose(cpuinfo);
- return numPhysicalCores = numPhysicalCores / ratio;
- }
-}
-
-#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__)
-
-/* Use apple-provided syscall
- * see: man 3 sysctl */
-UTIL_STATIC int UTIL_countPhysicalCores(void)
-{
- static int numPhysicalCores = 0;
-
- if (numPhysicalCores != 0) return numPhysicalCores;
-
- numPhysicalCores = (int)sysconf(_SC_NPROCESSORS_ONLN);
- if (numPhysicalCores == -1) {
- /* value not queryable, fall back on 1 */
- return numPhysicalCores = 1;
- }
- return numPhysicalCores;
-}
-
-#else
-
-UTIL_STATIC int UTIL_countPhysicalCores(void)
-{
- /* assume 1 */
- return 1;
-}
-
-#endif
+int UTIL_countPhysicalCores(void);
#if defined (__cplusplus)
}
From c7251e5151220d558eb8bf8d106c5efd9359db88 Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Thu, 11 Oct 2018 18:05:15 -0700
Subject: [PATCH 08/13] Address most comments
---
programs/util.c | 164 ++++++++++++++++++++++++------------------------
1 file changed, 82 insertions(+), 82 deletions(-)
diff --git a/programs/util.c b/programs/util.c
index 5fde1e00a..5c5e19606 100644
--- a/programs/util.c
+++ b/programs/util.c
@@ -127,7 +127,7 @@ U64 UTIL_getTotalFileSize(const char* const * const fileNamesTable, unsigned nbF
return error ? UTIL_FILESIZE_UNKNOWN : total;
}
- #ifdef _WIN32
+#ifdef _WIN32
int UTIL_prepareFileList(const char *dirName, char** bufStart, size_t* pos, char** bufEnd, int followLinks)
{
char* path;
@@ -326,53 +326,55 @@ int g_utilDisplayLevel;
* Time functions
******************************************/
#if defined(_WIN32) /* Windows */
- UTIL_time_t UTIL_getTime(void) { UTIL_time_t x; QueryPerformanceCounter(&x); return x; }
- U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd)
- {
- static LARGE_INTEGER ticksPerSecond;
- static int init = 0;
- if (!init) {
- if (!QueryPerformanceFrequency(&ticksPerSecond))
- UTIL_DISPLAYLEVEL(1, "ERROR: QueryPerformanceFrequency() failure\n");
- init = 1;
- }
- return 1000000ULL*(clockEnd.QuadPart - clockStart.QuadPart)/ticksPerSecond.QuadPart;
+
+UTIL_time_t UTIL_getTime(void) { UTIL_time_t x; QueryPerformanceCounter(&x); return x; }
+
+U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd)
+{
+ static LARGE_INTEGER ticksPerSecond;
+ static int init = 0;
+ if (!init) {
+ if (!QueryPerformanceFrequency(&ticksPerSecond))
+ UTIL_DISPLAYLEVEL(1, "ERROR: QueryPerformanceFrequency() failure\n");
+ init = 1;
}
- U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd)
- {
- static LARGE_INTEGER ticksPerSecond;
- static int init = 0;
- if (!init) {
- if (!QueryPerformanceFrequency(&ticksPerSecond))
- UTIL_DISPLAYLEVEL(1, "ERROR: QueryPerformanceFrequency() failure\n");
- init = 1;
- }
- return 1000000000ULL*(clockEnd.QuadPart - clockStart.QuadPart)/ticksPerSecond.QuadPart;
+ return 1000000ULL*(clockEnd.QuadPart - clockStart.QuadPart)/ticksPerSecond.QuadPart;
+}
+U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd)
+{
+ static LARGE_INTEGER ticksPerSecond;
+ static int init = 0;
+ if (!init) {
+ if (!QueryPerformanceFrequency(&ticksPerSecond))
+ UTIL_DISPLAYLEVEL(1, "ERROR: QueryPerformanceFrequency() failure\n");
+ init = 1;
}
+ return 1000000000ULL*(clockEnd.QuadPart - clockStart.QuadPart)/ticksPerSecond.QuadPart;
+}
#elif defined(__APPLE__) && defined(__MACH__)
- UTIL_time_t UTIL_getTime(void) { return mach_absolute_time(); }
- U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd)
- {
- static mach_timebase_info_data_t rate;
- static int init = 0;
- if (!init) {
- mach_timebase_info(&rate);
- init = 1;
- }
- return (((clockEnd - clockStart) * (U64)rate.numer) / ((U64)rate.denom))/1000ULL;
+UTIL_time_t UTIL_getTime(void) { return mach_absolute_time(); }
+U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd)
+{
+ static mach_timebase_info_data_t rate;
+ static int init = 0;
+ if (!init) {
+ mach_timebase_info(&rate);
+ init = 1;
}
+ return (((clockEnd - clockStart) * (U64)rate.numer) / ((U64)rate.denom))/1000ULL;
+}
- U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd)
- {
- static mach_timebase_info_data_t rate;
- static int init = 0;
- if (!init) {
- mach_timebase_info(&rate);
- init = 1;
- }
- return ((clockEnd - clockStart) * (U64)rate.numer) / ((U64)rate.denom);
+U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd)
+{
+ static mach_timebase_info_data_t rate;
+ static int init = 0;
+ if (!init) {
+ mach_timebase_info(&rate);
+ init = 1;
}
+ return ((clockEnd - clockStart) * (U64)rate.numer) / ((U64)rate.denom);
+}
#elif (PLATFORM_POSIX_VERSION >= 200112L) \
&& (defined(__UCLIBC__) \
@@ -380,55 +382,53 @@ int g_utilDisplayLevel;
&& ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 17) \
|| (__GLIBC__ > 2))))
- UTIL_time_t UTIL_getTime(void)
- {
- UTIL_time_t time;
- if (clock_gettime(CLOCK_MONOTONIC, &time))
- UTIL_DISPLAYLEVEL(1, "ERROR: Failed to get time\n"); /* we could also exit() */
- return time;
- }
+UTIL_time_t UTIL_getTime(void)
+{
+ UTIL_time_t time;
+ if (clock_gettime(CLOCK_MONOTONIC, &time))
+ UTIL_DISPLAYLEVEL(1, "ERROR: Failed to get time\n"); /* we could also exit() */
+ return time;
+}
- UTIL_time_t UTIL_getSpanTime(UTIL_time_t begin, UTIL_time_t end)
- {
- UTIL_time_t diff;
- if (end.tv_nsec < begin.tv_nsec) {
- diff.tv_sec = (end.tv_sec - 1) - begin.tv_sec;
- diff.tv_nsec = (end.tv_nsec + 1000000000ULL) - begin.tv_nsec;
- } else {
- diff.tv_sec = end.tv_sec - begin.tv_sec;
- diff.tv_nsec = end.tv_nsec - begin.tv_nsec;
- }
- return diff;
+UTIL_time_t UTIL_getSpanTime(UTIL_time_t begin, UTIL_time_t end)
+{
+ UTIL_time_t diff;
+ if (end.tv_nsec < begin.tv_nsec) {
+ diff.tv_sec = (end.tv_sec - 1) - begin.tv_sec;
+ diff.tv_nsec = (end.tv_nsec + 1000000000ULL) - begin.tv_nsec;
+ } else {
+ diff.tv_sec = end.tv_sec - begin.tv_sec;
+ diff.tv_nsec = end.tv_nsec - begin.tv_nsec;
}
+ return diff;
+}
- U64 UTIL_getSpanTimeMicro(UTIL_time_t begin, UTIL_time_t end)
- {
- UTIL_time_t const diff = UTIL_getSpanTime(begin, end);
- U64 micro = 0;
- micro += 1000000ULL * diff.tv_sec;
- micro += diff.tv_nsec / 1000ULL;
- return micro;
- }
+U64 UTIL_getSpanTimeMicro(UTIL_time_t begin, UTIL_time_t end)
+{
+ UTIL_time_t const diff = UTIL_getSpanTime(begin, end);
+ U64 micro = 0;
+ micro += 1000000ULL * diff.tv_sec;
+ micro += diff.tv_nsec / 1000ULL;
+ return micro;
+}
- U64 UTIL_getSpanTimeNano(UTIL_time_t begin, UTIL_time_t end)
- {
- UTIL_time_t const diff = UTIL_getSpanTime(begin, end);
- U64 nano = 0;
- nano += 1000000000ULL * diff.tv_sec;
- nano += diff.tv_nsec;
- return nano;
- }
+U64 UTIL_getSpanTimeNano(UTIL_time_t begin, UTIL_time_t end)
+{
+ UTIL_time_t const diff = UTIL_getSpanTime(begin, end);
+ U64 nano = 0;
+ nano += 1000000000ULL * diff.tv_sec;
+ nano += diff.tv_nsec;
+ return nano;
+}
#else /* relies on standard C (note : clock_t measurements can be wrong when using multi-threading) */
- typedef clock_t UTIL_time_t;
- #define UTIL_TIME_INITIALIZER 0
- UTIL_time_t UTIL_getTime(void) { return clock(); }
- U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd) { return 1000000ULL * (clockEnd - clockStart) / CLOCKS_PER_SEC; }
- U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd) { return 1000000000ULL * (clockEnd - clockStart) / CLOCKS_PER_SEC; }
+typedef clock_t UTIL_time_t;
+#define UTIL_TIME_INITIALIZER 0
+UTIL_time_t UTIL_getTime(void) { return clock(); }
+U64 UTIL_getSpanTimeMicro(UTIL_time_t clockStart, UTIL_time_t clockEnd) { return 1000000ULL * (clockEnd - clockStart) / CLOCKS_PER_SEC; }
+U64 UTIL_getSpanTimeNano(UTIL_time_t clockStart, UTIL_time_t clockEnd) { return 1000000000ULL * (clockEnd - clockStart) / CLOCKS_PER_SEC; }
#endif
-#define SEC_TO_MICRO 1000000
-
/* returns time span in microseconds */
U64 UTIL_clockSpanMicro(UTIL_time_t clockStart )
{
From 535226cadbca08cee67a40505482489aca4e681b Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Fri, 12 Oct 2018 11:36:02 -0700
Subject: [PATCH 09/13] Fixing poolTests, I will understand about cmake and
VStudio and push them in a later commit
---
tests/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/Makefile b/tests/Makefile
index ffac3d4f8..da68bddcf 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -233,7 +233,7 @@ else
$(CC) $(FLAGS) $< -o $@$(EXT) -Wl,-rpath=$(ZSTDDIR) $(ZSTDDIR)/libzstd.so # broken on Mac
endif
-poolTests : poolTests.c $(ZSTDDIR)/common/pool.c $(ZSTDDIR)/common/threading.c $(ZSTDDIR)/common/zstd_common.c $(ZSTDDIR)/common/error_private.c
+poolTests : $(PRGDIR)/util.c poolTests.c $(ZSTDDIR)/common/pool.c $(ZSTDDIR)/common/threading.c $(ZSTDDIR)/common/zstd_common.c $(ZSTDDIR)/common/error_private.c
$(CC) $(FLAGS) $(MULTITHREAD) $^ -o $@$(EXT)
.PHONY: versionsTest
From b91f982e1e073fe8c971874778f90bbaca9a7423 Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Fri, 12 Oct 2018 14:08:13 -0700
Subject: [PATCH 10/13] Adding chagnes for cmake and VStudio
---
build/VS2008/fullbench/fullbench.vcproj | 4 ++++
build/VS2008/fuzzer/fuzzer.vcproj | 4 ++++
build/VS2008/zstd/zstd.vcproj | 4 ++++
build/VS2010/datagen/datagen.vcxproj | 3 ++-
build/VS2010/fullbench-dll/fullbench-dll.vcxproj | 3 ++-
build/VS2010/fullbench/fullbench.vcxproj | 1 +
build/VS2010/fuzzer/fuzzer.vcxproj | 1 +
build/cmake/programs/CMakeLists.txt | 4 ++--
8 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/build/VS2008/fullbench/fullbench.vcproj b/build/VS2008/fullbench/fullbench.vcproj
index a31883acf..c9547dfea 100644
--- a/build/VS2008/fullbench/fullbench.vcproj
+++ b/build/VS2008/fullbench/fullbench.vcproj
@@ -396,6 +396,10 @@
RelativePath="..\..\..\tests\fullbench.c"
>
+
+
diff --git a/build/VS2008/fuzzer/fuzzer.vcproj b/build/VS2008/fuzzer/fuzzer.vcproj
index 4d444caef..a1f5ce07f 100644
--- a/build/VS2008/fuzzer/fuzzer.vcproj
+++ b/build/VS2008/fuzzer/fuzzer.vcproj
@@ -328,6 +328,10 @@
Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
>
+
+
diff --git a/build/VS2008/zstd/zstd.vcproj b/build/VS2008/zstd/zstd.vcproj
index 595733d2b..263fff5d6 100644
--- a/build/VS2008/zstd/zstd.vcproj
+++ b/build/VS2008/zstd/zstd.vcproj
@@ -518,6 +518,10 @@
RelativePath="..\..\..\lib\common\threading.h"
>
+
+
diff --git a/build/VS2010/datagen/datagen.vcxproj b/build/VS2010/datagen/datagen.vcxproj
index bd8a213da..a66358a0d 100644
--- a/build/VS2010/datagen/datagen.vcxproj
+++ b/build/VS2010/datagen/datagen.vcxproj
@@ -155,6 +155,7 @@
+
@@ -164,4 +165,4 @@
-
\ No newline at end of file
+
diff --git a/build/VS2010/fullbench-dll/fullbench-dll.vcxproj b/build/VS2010/fullbench-dll/fullbench-dll.vcxproj
index 6939d4406..fae4e5c19 100644
--- a/build/VS2010/fullbench-dll/fullbench-dll.vcxproj
+++ b/build/VS2010/fullbench-dll/fullbench-dll.vcxproj
@@ -166,6 +166,7 @@
+
@@ -184,4 +185,4 @@
-
\ No newline at end of file
+
diff --git a/build/VS2010/fullbench/fullbench.vcxproj b/build/VS2010/fullbench/fullbench.vcxproj
index d2276c33d..f42006128 100644
--- a/build/VS2010/fullbench/fullbench.vcxproj
+++ b/build/VS2010/fullbench/fullbench.vcxproj
@@ -175,6 +175,7 @@
+
diff --git a/build/VS2010/fuzzer/fuzzer.vcxproj b/build/VS2010/fuzzer/fuzzer.vcxproj
index 6077cd2c1..946cd33b7 100644
--- a/build/VS2010/fuzzer/fuzzer.vcxproj
+++ b/build/VS2010/fuzzer/fuzzer.vcxproj
@@ -179,6 +179,7 @@
+
diff --git a/build/cmake/programs/CMakeLists.txt b/build/cmake/programs/CMakeLists.txt
index 221c24811..708d2b27f 100644
--- a/build/cmake/programs/CMakeLists.txt
+++ b/build/cmake/programs/CMakeLists.txt
@@ -26,7 +26,7 @@ IF (MSVC)
SET(PlatformDependResources ${MSVC_RESOURCE_DIR}/zstd.rc)
ENDIF (MSVC)
-ADD_EXECUTABLE(zstd ${PROGRAMS_DIR}/zstdcli.c ${PROGRAMS_DIR}/fileio.c ${PROGRAMS_DIR}/bench.c ${PROGRAMS_DIR}/datagen.c ${PROGRAMS_DIR}/dibio.c ${PlatformDependResources})
+ADD_EXECUTABLE(zstd ${PROGRAMS_DIR}/zstdcli.c ${PROGRAMS_DIR}/util.c ${PROGRAMS_DIR}/fileio.c ${PROGRAMS_DIR}/bench.c ${PROGRAMS_DIR}/datagen.c ${PROGRAMS_DIR}/dibio.c ${PlatformDependResources})
TARGET_LINK_LIBRARIES(zstd libzstd_static)
IF (CMAKE_SYSTEM_NAME MATCHES "(Solaris|SunOS)")
TARGET_LINK_LIBRARIES(zstd rt)
@@ -56,7 +56,7 @@ IF (UNIX)
INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/zstdcat.1 DESTINATION "${MAN_INSTALL_DIR}")
INSTALL(FILES ${CMAKE_CURRENT_BINARY_DIR}/unzstd.1 DESTINATION "${MAN_INSTALL_DIR}")
- ADD_EXECUTABLE(zstd-frugal ${PROGRAMS_DIR}/zstdcli.c ${PROGRAMS_DIR}/fileio.c)
+ ADD_EXECUTABLE(zstd-frugal ${PROGRAMS_DIR}/zstdcli.c ${PROGRAMS_DIR}/util.c ${PROGRAMS_DIR}/fileio.c)
TARGET_LINK_LIBRARIES(zstd-frugal libzstd_static)
SET_PROPERTY(TARGET zstd-frugal APPEND PROPERTY COMPILE_DEFINITIONS "ZSTD_NOBENCH;ZSTD_NODICT")
ENDIF (UNIX)
From 9056fe22909ce539b569054aba961bb276cd9723 Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Fri, 12 Oct 2018 14:22:05 -0700
Subject: [PATCH 11/13] Adding util.c to zstd VS file
---
build/VS2010/fullbench/fullbench.vcxproj | 2 +-
build/VS2010/zstd/zstd.vcxproj | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/build/VS2010/fullbench/fullbench.vcxproj b/build/VS2010/fullbench/fullbench.vcxproj
index f42006128..b7d754e13 100644
--- a/build/VS2010/fullbench/fullbench.vcxproj
+++ b/build/VS2010/fullbench/fullbench.vcxproj
@@ -156,6 +156,7 @@
+
@@ -175,7 +176,6 @@
-
diff --git a/build/VS2010/zstd/zstd.vcxproj b/build/VS2010/zstd/zstd.vcxproj
index aea18b247..c9a7a1aa2 100644
--- a/build/VS2010/zstd/zstd.vcxproj
+++ b/build/VS2010/zstd/zstd.vcxproj
@@ -50,6 +50,7 @@
+
From 5dc94430530fd7f9377356e5e635ae5583605624 Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Fri, 12 Oct 2018 19:06:58 -0700
Subject: [PATCH 12/13] Changing tests/fuzz/Makefile to move util.o to FUZZ_SRC
instead
---
tests/fuzz/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tests/fuzz/Makefile b/tests/fuzz/Makefile
index 22617ed5c..1530138cf 100644
--- a/tests/fuzz/Makefile
+++ b/tests/fuzz/Makefile
@@ -41,7 +41,7 @@ FUZZ_ARFLAGS := $(ARFLAGS)
FUZZ_TARGET_FLAGS = $(FUZZ_CPPFLAGS) $(FUZZ_CXXFLAGS) $(FUZZ_LDFLAGS)
FUZZ_HEADERS := fuzz_helpers.h fuzz.h zstd_helpers.h
-FUZZ_SRC := zstd_helpers.c
+FUZZ_SRC := $(PRGDIR)/util.c zstd_helpers.c
ZSTDCOMMON_SRC := $(ZSTDDIR)/common/*.c
ZSTDCOMP_SRC := $(ZSTDDIR)/compress/*.c
@@ -52,7 +52,7 @@ FUZZ_SRC := \
$(ZSTDCOMMON_SRC) \
$(ZSTDCOMP_SRC)
-FUZZ_OBJ := $(patsubst %.c,%.o, $(wildcard $(FUZZ_SRC))) $(PRGDIR)/util.o
+FUZZ_OBJ := $(patsubst %.c,%.o, $(wildcard $(FUZZ_SRC)))
.PHONY: default all clean cleanall
From c430c1068b2d2d8f30056ecb46076b1888d3db6e Mon Sep 17 00:00:00 2001
From: Rohit Jain
Date: Tue, 16 Oct 2018 23:33:17 -0700
Subject: [PATCH 13/13] Made the changes in zstd vcproj file for VS2008 as
requested
---
build/VS2008/zstd/zstd.vcproj | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/build/VS2008/zstd/zstd.vcproj b/build/VS2008/zstd/zstd.vcproj
index 263fff5d6..ec8e94867 100644
--- a/build/VS2008/zstd/zstd.vcproj
+++ b/build/VS2008/zstd/zstd.vcproj
@@ -332,6 +332,10 @@
Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
>
+
+
@@ -518,10 +522,6 @@
RelativePath="..\..\..\lib\common\threading.h"
>
-
-