docs: diagrams architecture

This commit is contained in:
Willem Vanhulle committed 2026-10-30 13:27:08 +01:00
1 parent a10e205e9b
commit f2544a964a
2 files changed
+202 -25

No files matched your search

+9 -3
View File
@@ -22,9 +22,15 @@ answered in place over the tree.
<img src="https://codeberg.org/wvhulle/bootvine/raw/branch/main/recordings/passphrase.png" width="640" alt="A LUKS passphrase prompt floating over the initrd tree">
It needs systemd ≥ 246 as PID 1,
[libdbus](https://www.freedesktop.org/wiki/Software/dbus/) and a virtual terminal. With a
systemd initrd it shows the boot from about a second after the kernel starts.
## Requirements
- systemd ≥ 246 as PID 1
- [libdbus](https://www.freedesktop.org/wiki/Software/dbus/)
- a virtual terminal
- a systemd initrd, to show the boot from the initrd as well as stage 2
See [Install](https://codeberg.org/wvhulle/bootvine/src/branch/main/docs/install.md)
for each distribution.
## Try it without installing
+193 -22
View File
@@ -9,31 +9,213 @@ while it does. None of this is needed to install or configure it.
service manager over D-Bus.
- **[libdbus](https://www.freedesktop.org/wiki/Software/dbus/).** It talks to
PID 1 over systemd's private socket, which
[zbus](https://github.com/dbus2/zbus) cannot use; see [systemd's private socket](#systemds-private-socket).
[zbus](https://github.com/dbus2/zbus) cannot use; see
[systemd's private socket](#systemds-private-socket).
- **A virtual terminal.** It draws on `tty12` and switches the console to it.
## Overview
```mermaid
sequenceDiagram
participant Kernel
participant PID1 as systemd (PID 1)
participant Bootvine as bootvine
participant Console as tty12
Kernel->>PID1: unpack the initramfs, run /init
PID1->>Bootvine: start bootvine.service (wanted by sysinit.target)
Bootvine->>PID1: connect to /run/systemd/private, Subscribe
Bootvine->>Console: take the console
loop initrd
PID1-->>Bootvine: JobNew, JobRemoved, PropertiesChanged
Bootvine->>Console: redraw the tree
end
PID1->>PID1: switch-root to /sysroot, re-execute
Note over Bootvine: spared, chroots into the new root
Bootvine->>PID1: reconnect, Subscribe
loop stage 2
PID1-->>Bootvine: JobNew, JobRemoved, PropertiesChanged
Bootvine->>Console: redraw the tree
end
PID1-->>Bootvine: StartupFinished
Bootvine->>Console: hand the console back
```
## Starting in the initrd
The initrd is a small root file system that the kernel unpacks into memory and
runs before the real root is mounted. When it runs systemd, its `/init` is
systemd as PID 1, with the same units, targets and D-Bus API as on the real
root. bootvine hooks into that systemd rather than into the kernel.
```mermaid
flowchart LR
subgraph Build["When the initramfs is built"]
Generator["NixOS, dracut module<br>or mkinitcpio hook"]
end
subgraph Initramfs
Binary["/usr/bin/bootvine"]
Unit["bootvine.service"]
Link["sysinit.target.wants/<br>bootvine.service"]
end
Generator --> Binary
Generator --> Unit
Generator --> Link
Link -- "pulls in at the first<br>transaction" --> Unit
```
1. **The image.** The initramfs generator copies the binary,
`bootvine.service` and `/etc/bootvine.toml` into the image and enables the
unit there, which links it into `sysinit.target.wants`.
2. **The first transaction.** systemd in the initrd starts `initrd.target`,
which pulls in `sysinit.target` and with it `bootvine.service`.
3. **No waiting.** `DefaultDependencies=no` drops the implicit
`After=sysinit.target basic.target`, so bootvine is not ordered after
anything and starts in parallel with udev and the first mounts, about a
second after the kernel.
4. **Knowing where it is.** `/etc/initrd-release` exists only in an initrd, so
its presence tells bootvine it is in the initrd stage.
Without a systemd initrd, the same unit is enabled in the real root and starts
in stage 2 instead.
## What systemd exposes
PID 1 publishes its state on D-Bus under `org.freedesktop.systemd1`. In the
initrd there is no D-Bus daemon yet, so bootvine connects straight to PID 1 on
the private socket `/run/systemd/private`, which systemd listens on from the
moment it starts. Where that socket is not available, it falls back to the
system bus.
```mermaid
flowchart LR
Bootvine["bootvine"]
subgraph PID1["systemd (PID 1)"]
Manager["Manager<br>/org/freedesktop/systemd1"]
Units["Unit objects"]
Jobs["Job objects"]
end
Bootvine -- "Subscribe, ListJobs,<br>GetDefaultTarget, GetUnit,<br>SetShowStatus" --> Manager
Bootvine -- "Properties.GetAll" --> Units
Bootvine -- "Properties.Get JobType" --> Jobs
Manager -. "JobNew, JobRemoved,<br>StartupFinished" .-> Bootvine
Units -. "PropertiesChanged" .-> Bootvine
```
On connecting, bootvine:
1. calls `Subscribe`, without which PID 1 sends no signals;
2. calls `ListJobs` for the jobs already queued, since some were queued before
it started;
3. calls `GetDefaultTarget` for the root of the tree, such as
`initrd.target` in the initrd and `graphical.target` in stage 2;
4. reads `FinishTimestampMonotonic`, which stays 0 until the boot is finished.
From then on it follows the signals:
| Signal | Carries | Used for |
| --- | --- | --- |
| `JobNew` | job id, job path, unit name | a row in the tree |
| `JobRemoved` | job id, result | the row finishes as done, failed or skipped |
| `PropertiesChanged` on a unit | `ActiveState` and its timestamps | running since, and the timeline |
| `StartupFinished` | | the boot reached its default target |
For each unit it meets, `GetUnit` and `Properties.GetAll` give its
`Description`, its `After=` and `Before=` orderings and its timeouts.
### From orderings to a tree
A unit waits on the units in its `After=` that still have a pending job; when
stopping, on the units in its `Before=`. bootvine nests each unit under the one
waiting on it, starting from the default target.
```mermaid
flowchart TB
Graphical["graphical.target"] --> DisplayManager["display-manager.service"]
Graphical --> MultiUser["multi-user.target"]
MultiUser --> RemoteFs["remote-fs.target"]
RemoteFs --> NetworkMount["mnt-data.mount"]
NetworkMount --> Network["network-online.target"]
Network --> NetworkManager["NetworkManager-wait-online.service"]
```
Here `graphical.target` is `After=multi-user.target`, `remote-fs.target` is
`After=` the network mount, the mount is `After=network-online.target`, and so
on down to the unit that is actually running. A target is ordered after the
units it wants, so targets fill the upper levels.
### Timestamps
systemd's `…TimestampMonotonic` properties count microseconds of
`CLOCK_MONOTONIC`, which starts with the kernel. bootvine reads the same
clock, so the times it shows are measured from the kernel start, even for
units that ran before bootvine did.
## Surviving the switch to the real root
At the end of the initrd, systemd mounts the real root at `/sysroot`, isolates
`initrd-switch-root.target` and runs `initrd-switch-root.service`, which makes
PID 1 kill the remaining processes, move `/sysroot` to `/` and re-execute
itself from the real root.
```mermaid
sequenceDiagram
participant PID1 as systemd (PID 1)
participant Bootvine as bootvine
PID1-->>Bootvine: JobNew initrd-switch-root.service
Bootvine->>Bootvine: open a directory fd to /sysroot
PID1->>PID1: isolate initrd-switch-root.target
Note over Bootvine: kept, IgnoreOnIsolate=yes
PID1->>PID1: kill remaining processes
Note over Bootvine: spared, argv[0] is @bootvine
PID1->>PID1: move /sysroot to /, re-execute
PID1--xBootvine: private socket closes
Bootvine->>Bootvine: fchdir to the fd, chroot(".")
Bootvine->>PID1: reconnect to /run/systemd/private
Note over Bootvine: stage 2, root is the default target
```
Three things keep bootvine alive across it:
- **A process name starting with `@`.** `ExecStart=@/usr/bin/bootvine
@bootvine` sets `argv[0]` to `@bootvine`, and switch-root spares processes
whose name starts with `@`.
- **`IgnoreOnIsolate=yes`**, so isolating `initrd-switch-root.target` does
not stop the unit.
- **A file descriptor to the new root.** After the switch, `/sysroot` no
longer exists and bootvine's own root is still the old initramfs. A
directory opened as soon as the switch-root job is queued lets it `chroot`
into the real root, where `/run/systemd/private` is the re-executed PID 1.
When the connection drops, bootvine moves the initrd into the finished stages
and reconnects for up to a minute.
## Lifecycle
### Boot
1. **Start.** `bootvine.service` is wanted by `sysinit.target` and has no
default dependencies, so it starts early. With a systemd initrd it starts
there, about a second after the kernel; without one it starts in stage 2.
2. **Switch to the real root.** In the initrd, bootvine survives the switch
and keeps drawing; the tree moves the initrd into the finished stages.
1. **Start**, in the initrd or in stage 2; see
[starting in the initrd](#starting-in-the-initrd).
2. **Switch to the real root**; see
[surviving the switch](#surviving-the-switch-to-the-real-root).
3. **Stage 2.** The tree shows the jobs still pending under the default
target, nested under the units waiting on them.
target.
4. **Handover.** bootvine hands the console back once the default target is
reached and the final frame has stayed for `keep-final-frame-for`. When a
display manager is starting, it waits instead for the display manager to
switch to its own terminal, up to `wait-for-display-manager`.
If it starts after the boot has already finished, it exits without touching
the console.
### Shutdown
`shutdown.target` conflicts with `bootvine.service` and wants
`bootvine-shutdown.service`, which runs `bootvine --shutdown`. It shows the
units being stopped, nested under the units that have to stop first, until
systemd hands over to `systemd-shutdown`.
`bootvine-shutdown.service`, which runs `bootvine --shutdown`. Its root is the
target being brought up, such as `poweroff.target` or `reboot.target`. It
shows the units being stopped, nested under the units that have to stop first,
until PID 1 hands over to `systemd-shutdown` and the connection closes.
## The console
@@ -64,7 +246,7 @@ starts, it stays behind it and comes forward once the prompt is answered.
| Unit | Wanted by | Notable settings |
| --- | --- | --- |
| `bootvine.service` | `sysinit.target` | `IgnoreOnIsolate=yes`, `Before=display-manager.service`, process name `@bootvine` |
| `bootvine.service` | `sysinit.target` | `DefaultDependencies=no`, `IgnoreOnIsolate=yes`, `Before=display-manager.service`, process name `@bootvine` |
| `bootvine-shutdown.service` | `shutdown.target` | `After=bootvine.service display-manager.service` |
Both draw on `/dev/tty12` with `TTYReset=yes` and log to the journal.
@@ -84,14 +266,3 @@ and differ only in where their inputs come from.
- libdbus sends its authentication handshake together with the first message,
which systemd leaves unread, so a no-reply ping goes out right after
connecting.
## Surviving the switch to the real root
Three things keep bootvine alive from the initrd into stage 2:
- a process name starting with `@`, which systemd's switch-root spares from
being killed;
- a unit that is not stopped on isolate (`IgnoreOnIsolate=yes`), since the
initrd isolates `initrd-switch-root.target`;
- a chroot through a file descriptor to the new root, taken as soon as the
switch is queued.