replaced `\+` by `*`.
`\+` means `[1-N]`,
while `*` means `[0-N]`,
so it's not strictly equivalent
but `\+` happens to be badly supported on some flavors of grep,
and for the purpose of these tests, `*` is good enough.
the flexArray in structure FSE_DecompressWksp
is just a way to derive a pointer easily,
without risk/complexity of calculating it manually.
Not sure if this change is good enough to avoid ubsan warnings though.
The sequence section starts with a number, which tells how sequences are present in the section.
If this number if 0, the section automatically ends.
The number 0 can be represented using the 1 byte or the 2 bytes formats.
That's because the 2-bytes formats fully overlaps the 1 byte format.
However, when 0 is represented using the 2-bytes format,
the decoder was expecting the sequence section to continue,
and was looking for FSE tables, which is incorrect.
Fixed this behavior, in both the reference decoder and the educational behavior.
In practice, this behavior never happens,
because the encoder will always select the 1-byte format to represent 0,
since this is more efficient.
Completed the fix with a new golden sample for tests,
a clarification of the specification,
and a decoder errata paragraph.
and in `decodecorpus`:
the specific case `nbSeq=127` can be represented using the 1-byte format.
Note that both the 1-byte and the 2-bytes formats are valid to represent this case,
so there was no "error", produced data remains valid,
it's just that the 1-byte format is more efficient.
fix#3667
Credit to @ip7z for finding this issue.
for compressed blocks of size exactly 128 KB
which used to be disallowed by the spec
but have become allowed in more recent version of the spec.
While this limitation is fixed in decoders v1.5.4+,
implementers should refrain from generating such block with their custom encoder
as they could be misclassified as corrupted by older decoder versions.
detected by @terrelln,
these issue could be triggered in specific scenarios
namely decompression of certain invalid magic-less frames,
or requested properties from certain invalid skippable frames.
decompression features automatic support of sparse files,
aka a form of "compression" where entire blocks consists only of zeroes.
This only works for some compatible file systems (like ext4),
others simply ignore it (like afs).
Triggering this feature relies of `fseek()`.
But `fseek()` is not compatible with non-seekable devices, such as pipes.
Therefore it's disabled for pipes.
However, there are other objects which are not compatible with `fseek()`, such as block devices.
Changed the logic, so that `fseek()` (and therefore sparse write) is only automatically enabled on regular files.
Note that this automatic behavior can always be overridden by explicit commands `--sparse` and `--no-sparse`.
fix#3583
As reported by @P-E-Meunier in https://github.com/facebook/zstd/issues/2662#issuecomment-1443836186,
seekable format ingestion speed can be particularly slow
when selected `FRAME_SIZE` is very small,
especially in combination with the recent row_hash compression mode.
The specific scenario mentioned was `pijul`,
using frame sizes of 256 bytes and level 10.
This is improved in this PR,
by providing approximate parameter adaptation to the compression process.
Tested locally on a M1 laptop,
ingestion of `enwik8` using `pijul` parameters
went from 35sec. (before this PR) to 2.5sec (with this PR).
For the specific corner case of a file full of zeroes,
this is even more pronounced, going from 45sec. to 0.5sec.
These benefits are unrelated to (and come on top of) other improvement efforts currently being made by @yoniko for the row_hash compression method specifically.
The `seekable_compress` test program has been updated to allows setting compression level,
in order to produce these performance results.
such scenario can happen, for example,
when trying a decompression-only benchmark on invalid data.
Other possibilities include an allocation error in an intermediate step.
So far, the benchmark would return immediately, but still return 0.
On command line, this would be confusing, as the program appears successful (though it does not display any successful message).
Now it returns !0, which can be interpreted as an error by command line.
Previously, cli-test would, by default, check that a stderr output is strictly identical to a saved outcome.
When there was no instructions on how to interpret stderr, it would default to requiring it to be empty.
There are many tests cases though where stderr content doesn't matter, and we are mainly interested in the return code of the cli.
For these cases, it was possible to set a .ignore document, which would instruct to ignore stderr content.
This PR update the logic, to make .ignore the default.
When willing to check that stderr content is empty, one must now add an empty .strict file.
This will allow status message to evolve without triggering many cli-tests errors.
This is especially important when some of these status include compression results, which may change as a result of compression optimizations.
It also makes it easier to add new tests which only care about the CLI's return code.
`zstd` CLI has progressively moved to the policy of
ignoring `--rm` command when the output is `stdout`.
The primary drive is to feature a behavior more consistent with `gzip`,
when `--rm` is the default, but is also ignored when output is `stdout`.
Other policies are certainly possible, but would break from this `gzip` convention.
The new policy was inconsistenly enforced, depending on the exact list of commands.
For example, it was possible to circumvent it by using `-c --rm` in this order,
which would re-establish source removal.
- Update the CLI so that it necessarily catch these situations and ensure that `--rm` is always disabled when output is `stdout`.
- Added a warning message in this case (for verbosity 3 `-v`).
- Added an `assert()`, which controls that `--rm` is no longer active with `stdout`
- Added tests, which control the behavior, even when `--rm` is added after `-c`
- Removed some legacy code which where trying to apply a specific policy for the `stdout` + `--rm` case, which is no longer possible
The timer storage type is no longer dependent on OS.
This will make it possible to re-enable posix precise timers
since the timer storage type will no longer be sensible to #include order.
See #3168 for details of pbs of previous interface.
Suggestion by @terrelln
A minor change in 5434de0 changed a `<=` into a `<`,
and as an indirect consequence allowed compression attempt of literals when there are only 6 literals to compress
(previous limit was effectively 7 literals).
This is not in itself a problem, as the threshold is merely an heuristic,
but it emerged a bug that has always been there, and was just never triggered so far due to the previous limit.
This bug would make the literal compressor believes that all literals are the same symbol,
but for the exact case where nbLiterals==6, plus a pretty wild combination of other limit conditions,
this outcome could be false, resulting in data corruption.
Replaced the blind heuristic by an actual test for all limit cases,
so that even if the threshold is changed again in the future,
the detection of RLE mode will remain reliable.
comparing level 19 to level 22 and expecting a stricter better result from level 22
is not that guaranteed,
because level 19 and 22 are very close to each other,
especially for small files,
so any noise in the final compression result
result in failing this test.
Level 22 could be compared to something much lower, like level 15,
But level 19 is required anyway, because there is a clamping test which depends on it.
Removed level 22, kept level 19
fix#3328
In situations where the alphabet size is very small,
the evaluation of literal costs from the Optimal Parser is initially incorrect.
It takes some time to converge, during which compression is less efficient.
This is especially important for small files,
because there will not be enough data to converge,
so most of the parsing is selected based on incorrect metrics.
After this patch, the scenario ##3328 gets fixed,
delivering the expected 29 bytes compressed size (smallest known compressed size).
Inspired by #3395,
offer a new capability to set all parameters defined in a ZSTD_compressionParameters structure
with a single symbol invocation
to improve user code brevity.
Reported by @shulib :
the specification for 4-streams mode
doesn't work when the amount of literals to compress is 5 bytes.
Extending it, it also doesn't work for sizes 1 or 2.
This patch updates the specification and the implementation
to require a minimum of 6 literals to trigger or accept the 4-streams mode.
The impact is expected to be a no-op :
the 4-streams mode is never triggered for such small quantity of literals anyway,
since it would be wasteful (it costs ~7.3 bytes more than single-stream mode).
An informal lower limit is set at ~256 bytes,
so the technical minimum is very far from this limit.
This is just meant for completeness of the specification.
fixed#3323, reported by @nigeltao
Completed documentation around this risk
(which is largely theoretical,
I can't see that happening in any "real world" scenario,
but an erroneous @srcSize value could indeed trigger it).
Yann Collet